ENTTEC CVC4 Constant Voltage LED Driver w/ DMX and Plink
Model: 73926
About: ENTTEC CVC4 Constant Voltage LED Driver w/ DMX and Plink
The CVC4 is the next evolution of the ENTTEC LED dimmer, building upon the the CVC3 and DIN-LED4PX. Think of the CVC4 as a higher power version of these popular models, with the added option for 16-bit dimming, plus the ability to configure it to take up the same channel footprint as a CVC3 in an existing application if you wish.
Capable of controlling up to 5A on each of its four channels at either a 16- or 8-bit resolution, the CVC4’s ultra smooth-dimming, auto-addressing functionality and simple mode selection make it one of the most comprehensive yet versatile devices imaginable.
With rugged, in-built surface mount tabs, it’s easy to install, whilst its solid-state, fanless design means that the CVC4 is virtually silent when in operation. Incorporating a user-serviceable fuse to reduce the amount of external components and wiring required for a safe installation, the CVC4 has been engineered to bring the ultimate in installer-friendly flexibility and fast deployment when constructing a constant voltage LED strip project.
- 12-24V input (20A maximum)
- Output to LED strip (5A per channel maximum)
- Huge 1KHz PWM signal refresh rate
- PLink in and out connector for auto-addressing (each unit can be spaced up to 300m away from the next when using PLink over Cat6 cable)
- Single DMX connector for DMX/RDM input, or chaining between devices
- Status LED and mode selection DIP switch to toggle between bitrate and RGB/RGBW operating modes
- User-serviceable fuse to protect against short circuits
- Passive cooling with internal overheating protection
- Compact design with integrated 4mm surface mounting holes
UPC: 9351074003413
Videos: ENTTEC CVC4 Constant Voltage LED Driver w/ DMX and Plink
Reviews: ENTTEC CVC4 Constant Voltage LED Driver w/ DMX and Plink
Warranty: ENTTEC CVC4 Constant Voltage LED Driver w/ DMX and Plink
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
1 Year Warranty
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
For Quebec Residents - Disclosure under the Consumer Protection Act
In compliance with Bill 29, AVShop.ca and ENTTEC do not guarantee the availability of replacement parts, repair services, or maintenance information for any products. Any applicable manufacturer warranties will remain in place.
