BLUSTREAM CAT100AU Digital Audio Over CAT5e/6 Extender - 100m

About: BLUSTREAM CAT100AU Digital Audio Over CAT5e/6 Extender - 100m

Our CAT100AU Audio over CAT5e/6 extender kit transmits audio signals up to a distance of 300m (192kHz signals up to 100m).

This plug-and-play device accepts both optical and coaxial digital inputs and includes a built in DAC to enable use of the stereo left / right audio output from either input.  

Features

• Extend optical and coaxial digital audio signals up to distances of 300m* over a single CAT cable
• Both optical and coaxial digital can be distributed at the same time
• Built in DAC (Digital to Analogue audio Converter) converts either optical or coaxial digital (selectable) to analogue stereo left/right audio output (source selected on receiver unit)
• Supports sample rates 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz up to 24-bit resolution
• Ultra low jitter and high fidelity design
  • *CAT100AU supports distances of up to: 192kHz - 100m; 96kHz - 150m; < 48kHz - 300m

Specifications

• CAT100AU-TX:
  • Audio Input Connectors
    • 1 x Optical (S/PDIF)
    • 1 x RCA (S/PDIF)
  • Output Connectors: 1 x RJ45
• CAT100AU-RX:
  • Input Connectors: 1 x RJ45 & 5V/1A DC
  • Output Connectors
    • 1 x Optical (S/PDIF)
    • 1 x RCA (S/PDIF)
    • 1 x Analogue left / right - 3.5mm stereo audio jack
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
• Power Supply: 5V/1A DC, barrel type connector
  • Power supplied to the transmitter unit from the receiver
• Balun Dimensions (with connections) (WxDxH): 2.56 x 3.15 x 0.98 inch (65 x 80 x 25mm)
• Balun Dimensions (without connections) (WxDxH): 2.56 x 2.76 x 0.98 inch (65 x 70 x 25mm)
• Ind. Balun Weight (excluding accessories): 0.29 lb (0.13kg)
• Shipping Weight: 1.32 lb (0.6kg)

What's in the Box

• 1x CAT100AU-TX
• 1x CAT100AU-RX
• 1x 5V/1A DC Power Supply
• 1x Mounting Kit
• 1x User Manual