Mipro ACT-848 UHF Digital Wideband Quad-Channel Receiver
Model: ACT-848 - 5NU
About: Mipro ACT-848 UHF Digital Wideband Quad-Channel Receiver
Features
- EIA standard metal chassis, with a newly designed color VFD, monitor headphone jack, a rotary control knob and buttons equipped on the front panel. The analog audio output, AES/EBU digital output, Dante or AVB network interface output and MIPRO RCS2.Net interface connectors are equipped on the rear panel.
- Exclusive 72 MHz wideband circuit increases interference-free compatible channels.
- Digital diversity circuit greatly improves the reception range and the full- range sound quality is not affected by the strength of RF signals or operating distance.
- Proprietary 256-bit encryption prevents eavesdropping.
- The DSP audio processor and D/A converter make the sound quality almost the same as the wired microphone.
- MIPRO Auto Scan and ACTTM function provide the transmitter’s frequency with precise and rapid sync to the receiver.
- There are 7 preset groups with a total of 224 pre-saved channels. The user-defined group allows users to choose and save up to 16 channels from 2,881 available frequencies.
- Each channel has separate audio output and 3 switchable output gains, and all is to ensure the microphone operates within proper sensitivity and dynamic range, free from distortion.
- Optional Dante or AVB digital network interface for digital audio output.
- Optional MIPRO RCS2.Net software connects to MIPRO DVU drive connector and allows real-time network remote-controlling and monitoring up to 64 channels. Additional new FSA software connects to MIPRO DVU drive connector and allows users to calculate interference-free compatible channels and link to the network.
- Antenna connector provides bias for MIPRO antenna systems to boost reception distance and signal.
- External AC 100 – 240 V switching power supply ensures stable operation of the system even under drastic voltage change.
- Pairs with ACT-800H handheld and ACT-800T bodypack transmitter.
- All are designed and made in Taiwan to ensure high quality and value.
Specifications
- Channel - Quad
- Chassis - EIA standard full-rack (19") metal chassis
- Monitor Output - Monitor headphone jack with volume control
- Network Interface - Dante or AVB (optional)
- Display - Color VFD
- Frequency Range - UHF 480 – 934 MHz (country dependent)
- Bandwidth - 72 MHz
- Receiving Mode - Digital diversity receiving
- Sensitivity - 12 dBμV @ S/N > 100 dB
- Audio Processing - DSP audio processor eliminates the compander noise that exists in analog systemsEncryption - 256-bit
- Frequency Response - 20Hz–20kHz(<-2dB)
- Dynamic Range - > 120 dBA
- Latency - 2.9 ms
- Audio Output - AES/EBU digital interface. Analog balanced output with 3 switchable levels: +16 dB / 0 dB / -6 dB
- EQ - Presets 10 digital audio and anti-feedback EQs
- PC Interface - USB Interface, MIPRO ACT-BUS for remote-control of up to 64 channels. FSA compatible channels calculator software allows users to manually set compatible channels. (sold separately)
- Antenna - Detachable. 50Ω TNC female connector provides bias for the MIPRO antenna systems.
- Power Supply - DC 12 – 15 V. External AC 100 – 240 V switching power supply
- Dimensions (W×H×D) - 420×44×219mm
- Weight - Approx. 2.3 kg
Videos: Mipro ACT-848 UHF Digital Wideband Quad-Channel Receiver
Reviews: Mipro ACT-848 UHF Digital Wideband Quad-Channel Receiver
Warranty: Mipro ACT-848 UHF Digital Wideband Quad-Channel Receiver
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
MIPRO values your business and always attempts to provide you the very best of service.
No limited warranty is provided by MIPRO unless your MIPRO Product was purchased from an authorized distributor or authorized reseller. Distributors may sell Products to resellers who then sell Products to end users.
MIPRO offers a 1-year manufacturer warranty on our products. It warrants that the products will be free from defects in materials or workmanship (as long as the wireless systems are used under normal circumstances and properly maintained) for a period of 1-year from the original date of purchase.
This warranty does not cover damage from shipping accidents, misuse, abuse, operation with incorrect AC voltage, operation with faulty associated equipment, modification, or alteration without prior factory approval, service by an unauthorized service center, and normal wear and tear. Units on which the serial number has been removed or defaced are not eligible for warranty service. Evidence of alteration, erasing, or forgery of proof-of-purchase documents will be cause to void the warranty. Any implied warranties, including warranties of merchantability and fitness for a particular use, shall be limited in duration to the period of time set forth above.
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
