JBL AM7212/64 High Power 2-Way 12-Inch Loudspeaker w/ LF & Rotatable Horn

About: JBL AM7212/64 High Power 2-Way 12-Inch Loudspeaker w/ LF & Rotatable Horn

The AM7212/64 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2262H 300 mm (12 in) low frequency driver and 2432H high-frequency 38mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver. The large format Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability.

The enclosure is constructed of multi-ply birch coated in JBL’s rugged DuraFlex™ finish and is heavily braced to maximize low-frequency performance. The trapezoid enclosure is fitted with fifteen M10 threaded attachment points and utilizes a 14-gauge steel grille internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance.

The AM7212/64 is part of JBL’s AE Series, a versatile family of loudspeakers intended for a wide variety of applications.

Features

• 60° x 40° Coverage
• 2262H Differential Drive® Low- Frequency Driver
• 2432H High-Frequency Compression Driver
• Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion
• Rotatable waveguide for vertical or horizontal orientation
• Bi-Amp/Passive Switchable
• Bi-amp and Passive Mode FIR Tuning Set Delivers Optimized Frequency & Phase Response, Coverage Consistency, and Sound Quality
• Available in Black, White and WRC/WRX finishes

Specifications

• Frequency Range (-10dB) -  36 Hz - 20 kHz
• Frequency Response (±3 dB) -  42 Hz - 18 kHz
• Coverage 
  • /64: 60° x 40°
  • /66: 60° x 60°
  • /95: 90° x 50° (Contact us to order model)
  • /00: 100° x 100° 
  • /26: 120° x 60° (Contact us to order model)
• LF Driver -  1 x JBL 2262H 300 mm (12 in) Differential Drive® driver with 75 mm (3 in) dual voice coil
• HF Driver -  JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
• System Type -  12" Two - Way, High Power, Full - Range
• Crossover Modes -  Bi-amp/Passive switchable
• Passive Crossover Frequency -  1.8 kHz
• Transducer Power Rating (AES) -  LF: 1000 W (4000 W peak), 2 hr700 W (2800 W peak), 100 hrsHF: 100 W (400 W peak), 2 hrs
• System Power Rating -  Passive mode: 600 W (2400 W peak), 100 hrs
• Maximum SPL (1m) -  Bi-amp mode:LF: 126 dB-SPL cont avg (132 dB peak)HF: 135 dB-SPL cont avg (141 dB peak)Passive mode:123 dB-SPL cont avg (129 dB peak)
• System Sensitivity (1w @ 1m) -  Passive mode: 95 dB SPL
• Nominal Impedance -  8 ohms
• Nominal LF Driver Impedance -  8 ohms
• Nominal HF Driver Impedance -  8 ohms
• Enclosure -  Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
• Suspension Attachment -  15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware
• Environmental -  Mil-Std 810; IP-x3 per IEC529.
• Dimensions (HxWxD) -  28 x 14.5 x 18 inch (711 x 369 x 458 mm)
• Net Weight (each) -  50.93 lb (23.1 kg)