Menu

Free shipping on most orders over $199!*

Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount

Model: 10-2260-II

Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount
Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount
Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount
Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount
Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount
Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount
Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount
  • Free Shipping!
  • Not In-Stock - Available to Order 
  • Not yet reviewed

More models to choose from:

Gold Mount$4,669.00
No Mount$4,090.00
V-Mount$4,669.00


About: Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount

Bolt 6 LT is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies.

Bolt 6 LT Sets offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode. In the MAX model, Broadcast Mode also allows users to increase the number of Receivers from 6 per Transmitter to unlimited per Transmitter.

The 750 model includes V (vertical) antennas. 1500 and MAX models include both V antennas and H (horizontal) antennas. H antennas are designed to maximize signal robustness in the most challenging RF environments.

Optionally, the 750 model of Bolt 6 LT can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor.

Kit options include the Transmitter and Receiver by themselves or within a Deluxe kit that also includes Gold or V-Mount Battery plates.

Specifications

  • Bolt 6 LT 750 Int Ant TX
    • Video
      • Video Inputs
        • 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
        • 1 x HDMI 1.4b Type-A receptacle
      • Video Outputs - 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
      • Sdi Ancillary Data Support - Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
      • Color Sampling - SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
      • Delay Tx To Rx - <0.001sec
      • Input Cross Conversion - Yes, HDMI to SDI (4Kp23.98-30 HDMI input is scaled and looped out as 1080p23.98-30 on SDI loopout)
    • Supported Resolutions
      • 4Kp23.98/24/25/29.97/30 (HDMI only)
      • 1080p23.98/24/25/29.97/30/50/59.94/60
      • 1080psf23.98/24/25/29.97/30
      • 1080i50/59.94/60
      • 720p50/59.94/60
    • Video Processing
      • Video Compression - Visually Lossless
      • Color Correction - None
    • Audio Processing
      • Audio Compression - 48kHz 24-bit PCM
    • Inputs
      • Audio Input - Embedded SDI/HDMI Audio Input (2 Channel)
    • Physical
      • Dimensions - 2.8" x 4.7" x 1.3" (72mm x 119.8mm x 33.1mm)
      • Weight - 7.5 oz (212 g)
      • Construction - Milled Aluminum(Chassis) and regulation-compliant PCB
      • Mountability - Multiple mounting options with 1/4"x20 and M3 holes
    • Interfaces
      • Configuration Interfaces - OSD with Menu, Joystick Navigation
      • Switches - On/Off Switch
      • Mobile App - Bolt App
      • Desktop App - Bolt Manager application for OSX & Windows
      • Usb Interface Functionality - Upgrade via Micro-USB
      • Bluetooth - 2.4 GHz
    • Network
      • Antennas - 4x Internal 2dBi Antennas
      • Wireless - DFS Frequencies: 5.270 ~ 5.670 GHz Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, and 5.945 ~ 6.425GHz
      • Rf Channel Selection - Auto, Manual
      • Encryption - AES-256, RSA-1024 key exchange
      • Rf Power - 23 dbm EIRP
      • Range - Up to 750 ft, line of sight
      • Unicast Multicast - Can connect one Transmitter to up to 6 Receivers
      • Noise Rejection
        • Can coexist with WiFi and 5GHz cordless phones
        • Can operate up to 6 sets in same location
      • Interoperability Compatibility - Can transmit wireless video to all ranges of Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device)
    • Power
      • Power Input - 2-Pin Circular locking Connector 6-28 VDC
      • Battery - None, optional Sony/Canon dual battery plate
      • Nominal Power Consumption - 9 Watts
    • Environmental
      • Operating Temperature - 0-40℃
  • Bolt 6 LT 750 Int Ant RX
    • Video
      • Video Outputs - 3G-SDI SMPTE 424M standard/75 Ω (BNC x 1), 1x HDMI 1.4b Type-A receptacle
      • Sdi Ancillary Data Support - Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
      • Color Sampling - SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
      • Delay Tx To Rx - <0.001sec
      • Output Video Scaling - No (4Kp30 signals are output on HDMI, but scaled to 1080p30 and output over SDI. 4Kp60 signals received from Bolt 6 XT devices are scaled to 1080p60 and output over both HDMI and SDI outputs)
    • Supported Resolutions
      • 4Kp23.98/24/25/29.97/30 (HDMI only)
      • 1080p23.98/24/25/29.97/30/50/59.94/60
      • 1080psf23.98/24/25/29.97/30
      • 1080i50/59.94/60
      • 720p50/59.94/60
    • Video Processing
      • Video Compression - Visually Lossless
      • Test Pattern Generator Support - Yes
      • Spectrum Analyzer - Yes
      • Color Correction - None
    • Outputs
      • Audio Output - Embedded SDI/HDMI Audio Input (2 Channel)
    • Physical
      • Dimensions - 4.8" x 4.2" x 1" (122.4mm x 106.2mm x 27.1mm)
      • Weight - 10.7 oz (304 g)
      • Construction - Milled Aluminum(Chassis) and regulation-compliant PCB
      • Mountability - Multiple mounting options with 3/8”x16 and 1/4-20” holes
    • Interfaces
      • Configuration Interfaces - OSD with Menu, Joystick Navigation
      • Switches - On/Off Switch
      • Mobile App - Bolt App
      • Desktop App - Bolt Manager application for OSX & Windows
      • Usb Interface Functionality - Upgrade via Micro-USB
      • Bluetooth - 2.4 GHz
    • Network
      • Antennas - 4x Internal 2dBi Antennas
      • Wireless - DFS Frequencies: 5.270 ~ 5.670 GHz Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, and 5.945 ~ 6.425GHz
      • Rf Channel Selection - Auto, Manual
      • Encryption - AES-256, RSA-1024 key exchange
      • Rf Power - 21 dbm EIRP
      • Range - Up to 750 ft, line of sight
      • Unicast Multicast - Can connect one Transmitter to up to 6 Receivers
      • Noise Rejection
        • Can coexist with WiFi and 5GHz cordless phones
        • Can operate up to 6 sets in same location
      • Interoperability Compatibility - Can receive wireless video to all ranges of Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device)
    • Power
      • Power Input - 2-Pin Circular locking Connector 6-28 VDC
      • Battery - None, optional Gold or V mount battery plate
      • Nominal Power Consumption - 11 Watts
    • Environmental
      • Operating Temperature - 0-40℃

What's in the Box

  • 1x Bolt 6 LT 750 TX Internal Antenna
  • 1x Bolt 6 LT 750 RX Internal Antenna
  • 1x 2pin to P-Tap Cable, 18in
  • 1x 2pin to AC Adapter 18W, 6ft
  • 2x Ultra Thin HDMI Male to Male Cable, 18in
  • 2x SDI Cable, 10in
  • 1x Lightstand Adapter 1/4-20in
  • 1x Hot Shoe Adaptor
  • 1x USB-C 2.0 Male to Male, 1m

UPC: 810156140358

Reviews: Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount

There are currently no product reviews.


Warranty: Teradek Bolt 6 LT 750 3G-SDI/HDMI Set - No Mount

AVShop.ca Warranty:

30 Days

Manufacturer's Warranty:

TERADEK warrants to the original owner-user that this TERADEK product will be free from defects in material or workmanship. This warranty is limited to twelve (12) months from the original purchase date, whether or not actual use begins on that date.

Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered



More Items from Wireless Video Transmission



More Items from Teradek