Accessories
-
TOA Canada N-SP80SB Standalone PCB SIP Board
N-SP80SB is a SIP-compliant hands-free Voice over IP (VoIP) PCB board that offers flexible audio communications using standard SIP protocol for parking facilities,... -
LD Systems DQOR Rubber Cover Set for Wall Mount Plate (2 Sets)
As an installer you should use a useful accessory to protect the wall mount plate of the DQOR loudspeakers during building works, and the speaker connection area in the warehouse....
-
TOA Canada Q-HY-BC2 Shallow Back Can
The Q-HY-BC2 Shallow Back Can is a metal case that can be attached to TOA’s F-2352SC flush-mount ceiling speaker for both exposed and flush-mounted applications. The... -
Q-SYS unDX4I 4x2 mic/line I/O Dante Wall Plate
Attero Tech unDX4I is a cost-effective Dante network audio interface designed for seamless integration into networked AV systems. It features four balanced XLR mic/line inputs and... -
Shure A710-TB Ceiling-Mount Tile Bridge for MXA710 Microphone
Shure A710-TB Overview: Easily install the MXA710 Linear Array Microphone to drop ceiling grids with this A710-TB Tile Bridge Accessory from Shure, a versatile kit that allows you... -
TOA Canada HY-RR2 Reinforcement Ring
The HY-RR2 Reinforcement Ring is specially designed for use with the F-2352SC Ceiling Speaker System, enabling the F-2352SC installation to a weak ceiling. It also permits the... -
TOA M-800RC Remote Audio Control Panel for M-8080D-AM (Black)
Designed for exclusive use with the M-8080D, the M-800RC Remote Audio Control Panel has a volume/routing control knob. Input/Output signal routing Volume control Direct power... -
TOA Canada HY-TR1 Trim Ring
The HY-TR1 Trim Ring allows installation of flush-mounted ceiling speakers in pre-existing ceiling panel holes which are over 200 mm in diameter. The use of 2 Trim Rings allows... -
TOA Canada TU-631M 30W Driver Units for Horn Speakers (High Impedance)
The TU-631M is a highly intelligible driver unit suited to public address announcement applications. Use the driver unit in combination with a suitable horn (optional). Its... -
TOA Canada TU-651M 50W Driver Units for Horn Speakers (High Impedance)
The TU-651M is a highly intelligible driver unit suited to public address announcement applications. Use the driver unit in combination with a suitable horn (optional). Its... -
TOA Canada TU-651 50W Driver Units for Horn Speakers (Low Impedance)
The TU-651 is a highly intelligible driver unit suited to public address announcement applications. Use the driver unit in combination with a suitable horn (optional). Its... -
Q-SYS Software Licence - Dante 64×64 (Perpetual)
Q-SYS SL-DAN-64-P is a perpetual, node-locked license that enables 64x64 channels of Dante™ network audio integration within the Q-SYS Ecosystem. This software-based... -
RDL RN22 Wall-Mounted Bi-Directional Mic/Line Dante Interface 2x2 - Black
The D-SERIES RN22 is a complete wall-mounted Dante or AES67 audio network interface. It features two XLR mic or line inputs on the front panel and two balanced line outputs on a... -
TOA Canada HY-BC1 Back Can
The HY-BC1 Back Can is a metal case attached to flush-mount ceiling speaker when mounted in exposed applications. The Back Can is hung from a ceiling suspension pipe. Metal case... -
TOA Canada HY-RR1 Reinforcement Ring
The HY-RR1 Reinforcement Ring is specially designed for use with the F-1522SC Ceiling Speaker System. It permits the F-1522SC to be installed even in a weak ceiling. Opening Hole... -
TOA Canada MT-S0601 Matching Transformer
The MT-S0601 matching transformer is designed to be installed in the speaker and used to convert the low impedance speaker into the high-impedance version. Specifications Rated... -
TOA Canada TU-631 30W Driver Units for Horn Speakers (Low Impedance)
The TU-631 is a highly intelligible driver unit suited to public address announcement applications. Use the driver unit in combination with a suitable horn (optional). Its... -
Atlona Rack Mount Shelf for OmniStream
The Atlona AT-OMNI-1XX-RACK-1RU is a 1U, full rack width shelf accessory that provides easy mounting and organization of two OmniStream Pro or R-Type encoders or... -
TOA M-802RC Remote Volume Control Panel w/ Audio Out for M-8080D-AM (White)
Designed for exclusive use with the M-8080D, the M-802RC Remote Audio Control Panel with two audio output has a volume/routing control knob. Input/Output signal routing Volume... -
TOA M-800RCT Remote Audio Control Panel w/ Touch Display for M-8080D-AM (Black)
Designed for exclusive use with the M-8080D, the M-800RCT Remote Audio Control Panel with touch display , can do volume adjustments, routing choices, preset choices, and give... -
RDL MB-3 Kit to Mount ST, TX Series Modules on FP Panel
TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track. Included: RDL MB-3 Mounting Bracket Assembly Hardware ** Track not included -
TOA Canada YS-60B Pole Band
The YS-60B Mounting Band is primarily designed to be used to install the speaker on a pole. It is comprised of two bands. Specifications Finish - Electroless zinc... -
TOA M-804EX 4 Port Expander Mofule for M-8080D-AM
Designed for exclusive use with the M-8080D, the M-804EX Extension Module 4 Ports is a port expander featuring a star connection of the controllers. 1 digital port In (from... -
Q-SYS QIO-ML2X2 2 Mic/Line Inputs & 2 Line Outputs Network Expander
Q-SYS QIO-ML2X2 is a network audio input/output expander designed to seamlessly integrate into the Q-SYS Ecosystem, providing two mic/line inputs and two line outputs. This...