JK Audio Daptor Two Wireless Phone Audio Interface
Model: DAP2
About: JK Audio Daptor Two Wireless Phone Audio Interface
Connect your wireless phone to the Daptor Two using the included 1/4" TRS to 3.5mm TRRS cell phone interface cable. Send and receive voice band audio during regular calls, or full bandwidth audio using third party codec applications. Your device will recognize Daptor Two as a headset which will disable the internal mic and speaker.
Audio Connections
You may use either the XLR input or 1/4" input, not both. The XLR input jack is disconnected when a cable is plugged into the 1/4" input jack. The same is true for the XLR and 1/4"output jacks.
Wireless Phone Headset Jack
Simply plug the included 1/4" TRS to 3.5 mm TRRS cell phone interface cable into the Wireless Phone Headset Jack of Daptor Two and into the 3.5 mm TRRS headset jack of any wireless phone or notebook computer that accepts a third party headset or earpiece. Cell phones that do not offer a 3.5mm TRRS headset jack will require an adapter (not provided) that allows the use of a third party 3.5mm TRRS headset or earpiece.
Features
- HD Voice Compatible (7 kHz Wide-Band Speech)
- 1/4" TRS to 3.5mm TRRS cable (CN113)
- 3-pin XLR Input/Output
- 1/4" Input/Output
- Passive Design (No Battery or AC Required)
- Made in America
Specifications
- Input: Balanced Female XLR / Unbalanced 1/4" Mono
- Impedance: 600 ohms
- Level: 250 mV RMS (-10 dBu nom, 0 dBu max)
- Output: Balanced Male XLR / Unbalanced 1/4" Mono
- Impedance: 600 ohms
- Level: 45 mV RMS (-25 dBu nom)
- Size: 4.4" x 2.7" x 1.2" (11.2 x 6.9 x 3.5 cm)
- Weight: 9 oz. (250 g)
UPC: 814170010062
