Menu

Free shipping on most orders over $199!*

COVID19 Update

JK Audio RemoteMix x4 Broadcast Field Mixer

Model: RMx4

JK Audio RemoteMix x4 Broadcast Field Mixer
JK Audio RemoteMix x4 Broadcast Field Mixer
  • Free Shipping!
  • Not in-Stock: Estimated Lead Time 7-10 Days 
  • Not yet reviewed




About: JK Audio RemoteMix x4 Broadcast Field Mixer

RMx4™ combines a four-channel field mixer with a four-channel headphone amplifier. After all, what good is a field mixer if you do not have a flexible monitoring capability for the whole crew? 3.5 mm send and receive jacks for recording or playing back of recorded material. Separate headphone level and source selection controls for each headphone output. Monitor just the clean mixer output, or the Cue input plus the mix.

Great Sound

Four low noise, high headroom active balanced mic inputs feature extremely high common mode rejection for outstanding cable noise immunity. High-Pass filter removes room rumble and mic handling noise. Direct drive DC coupled XLR output for improved output cable noise immunity. A soft limiter prevents overdriving the full-duplex headset interface, while the master XLR and 3.5 mm outputs are pre-limiter (full range).

Power Smart Design

Phantom power is not always needed, yet it can be a real drain on batteries. The phantom power generator only runs if any of the rear panel 48 V switches are set to “ON” position. Low noise, low power ICs are used throughout to preserve battery life. The 100-240 VAC desktop style power supply (included) overrides the battery power only when the supply is actually providing power. If the power goes out, the batteries automatically cut in. Use one battery or two. Separate compartments for hot swapping batteries.

Radio/Podcast

RMx4 is designed for news, sports, and live remotes. Use it as a front-end mixer for your POTS, ISDN, IP or smart phone codec. XLR out, ¼” return to headphones.

TV/AV

RMx4 is designed for ENG, Sports, and interviews, with four ¼” headphone outputs. 3.5 mm TRRS provides 2-way IFB audio from your cell phone or notebook.

Features

  • Four Low Noise, High Headroom, XLR Mic Inputs
  • Mic/Line Switches on Channels 3 & 4
  • Individually Switchable 48v Phantom Power
  • 120 Hz Low Cut Filter
  • Master XLR Output 20 Hz – 20 kHz
  • Four ¼” Headphone Jacks with Individual Source Selector and Level Controls
  • ¼” Headphone Cue Input
  • Phone Headset Interface with 3.5 mm TRRS Plug
  • 3.5 mm Stereo Line Input
  • 3.5 mm Stereo Line Output
  • LED VU Meter
  • Hot Swappable Dual 9V Batteries and 120-240 VAC External Power Supply
  • Made in America

Specifications

  • Microphones Female XLR
    • Impedance Mic Level: 2k ohms
    • Line Level: 50k ohms
    • Level Mic Level: -25 dBu nom
    • Line Level: +20 dBu max
    • Mic/Line Pad Switch -40 dB
    • Phantom Power 48 VDC with 6.8k ohm Supply Resistance
  • Line Input 1/8" (3.5mm) Stereo
    • Impedance 20k ohms
    • Level -10 dBu nom
  • Headphone Cue In 1/4" Mono
    • Impedance 20k ohms
    • Level -10 dBu nom
  • Master Output Balanced Male XLR
    • Impedance 50 ohms
    • Level +16 dBu max
    • Frequency Response 20 Hz - 20 kHz +/- 1dB
    • THD 0.04% THD @ +16 dBu
  • Line Output 1/8" (3.5mm) Stereo
    • Impedance 100 ohms
    • Level -10 dBu nom
  • Headphones 1/4" Stereo
    • Impedance 8 ohms
    • Level 1/3 watt per channel
  • Power 100-240 VAC, 50-60Hz External Power Supply or Two 9 VDC Batteries
  • Size 9.5" x 8" x 3" (24 x 20 x 8 cm)
  • Weight 3.6 lbs (1.6 kg)

UPC: 814170010895

Reviews: JK Audio RemoteMix x4 Broadcast Field Mixer

There are currently no product reviews.