JK Audio ComPack Universal Telephone Audio Interface

About: JK Audio ComPack Universal Telephone Audio Interface

Pick up this new handheld road tool to get audio in and out of analog phone lines, PBX systems, even cell phones. Perfect for Remote Broadcasts, IFB feeds, or interviews over any phone connection.

Wireless Phones and Notebooks

Simply plug ComPack into the 3.5 mm headset jack of your wireless phone or notebook computer. Your cell phone will recognize ComPack as a headset which will disable the internal mic and speaker.

ISDN, PBX, and VoIP Systems

Unplug the handset from any phone and plug the coily cord into ComPack. You can now send and receive audio through the ISDN, PBX, or VoIP telephone set.

Analog Phones

Plug ComPack into an RJ-11 jack, go off-hook and dial, or answer an incoming call.

Add a Phone Line to the Party Line

ComPack also functions as a simple telecom interface for your beltpack intercom system. This no-frills feature allows you to connect the 3 pin male XLR to your wet party line. This provides a full duplex, always-on connection to any telephone network.

Features

• HD Voice Compatible (7 kHz Wide-Band Speech)
• Works with Analog and Digital PBX or VoIP Phones
• 4-conductor 3.5mm Headset Interface
• Connects to Wireless Phones & Notebooks
• Headphone, Mic, and Line Input Level Controls
• XLR Mic Input (Mic/Line Switch)
• XLR Line Output / Com Link
• 3.5mm Stereo Line Input
• 1/4" Stereo Headphone Jack
• Transmit Clip LED
• Battery Test LED
• DTMF Keypad and Lockout Switch
• Handset Selector Switch (Electret, Carbon, Dynamic)
• >20 Hours on one 9V Alkaline Battery
• Made in America

Specifications

• Mic In Female XLR
  • Impedance 1k ohms
  • Level 15 mV RMS (-34 dBu nom)
  • Mic/Line Pad Switch +6 dBu max
• Line Input 1/8" (3.5mm) Stereo
  • Impedance 20k ohms
  • Level 250 mV RMS (-10 dBu nom)
• Mix Out Male XLR
  • Impedance 600 ohms
  • Level 45 mV RMS (-25 dBu nom)
• Com Link Male XLR
  • Bi-Directional Unbalanced
• Headphone 1/4" Stereo
  • Impedance 8 ohms
  • Level 1/2 watt
• Phone Line Connector RJ11C
• Handset Connector RJ22
• Ringer 0.9B REN
• Isolation 1500 VAC
• Keypad DTMF
• Power 9 volt battery
• AC power supply 120-240 VAC (included)
• Size 8" x 3" x 2.2" (20.3 x 7.6 x 5.6 cm)
• Weight 1.5 lbs (680 g)