JK Audio RemoteMix 3.5 Broadcast Field Mixer

About: JK Audio RemoteMix 3.5 Broadcast Field Mixer

JK Audio introduces RemoteMix 3.5™, a three-channel field mixer and headphone amplifier. More than just a field mixer, this is a universal communications interface. RemoteMix 3.5™ features a phone line hybrid and keypad, a PBX handset interface, and both wired and wireless cell phone interfaces. These parts were designed to work together, saving setup time in the field.

TV

RemoteMix 3.5 gives you the ultimate phone connectivity with three ¼" IFB headphone feeds. Send and receive interview audio and pull IFB out of any business phone system, even your cell phone or notebook.

Radio

RemoteMix 3.5 is perfect for sports remotes. Use it as a phone line hybrid, calling into your studio talk show hybrid. Use it as a front-end mixer for your POTS, ISDN, IP or smart phone codec.

Great Sound

A soft limiter prevents overdriving the phone line interfaces, while the mixer XLR output is pre-limiter (full range). Convenient 3.5mm send and receive jacks for recording the show, or mixing in your MP3 player.

Bluetooth Wireless Technology

Route audio through your cell phone or notebook using Bluetooth Wireless Technology. The Bluetooth interface will connect in hands free mode allowing a two way 3.4 kHz telecom bandwidth connection, 7 kHz Wide Band Speech when used with compatible phones on compatible networks. The Bluetooth interface can also connect in wireless headphone mode offering a 20 kHz audio bandwidth, listen-only connection.

Wireless Phones and Notebooks

Simply plug RemoteMix 3.5 into the 3.5 mm headset jack of your wireless phone or notebook computer. Your cell phone will recognize ComPack as a headset which will disable the internal mic and speaker.

ISDN, PBX, and VoIP Systems

Unplug the handset from any phone and plug the coily cord into RemoteMix 3.5. You can now send and receive audio through the ISDN, PBX, or VoIP telephone set.

Features

• HD Voice Compatible (7 kHz Wide-Band Speech)
• Works with Analog and Digital PBX or VoIP Phones
• Connects to Wireless Phones & Notebooks
• Bluetooth Wireless Technology
• 4-conductor 3.5mm Headset Interface
• 3 XLR Mic Jacks
• Mii/Line Pad Switch
• 3 ¼” Headphone Jacks with Individual Level Controls
• 3.5 mm Send and Receive Jacks
• LED VU Meter
• Phone Line Hybrid with DTMF Keypad
• Redial Button
• Handset Selector Switch (Electret, Carbon, Dynamic)
• Hot Swappable Dual 9V Batteries and 120-240 VAC External Power Supply
• Made in America

Specifications

• Microphones Female XLR
  • Impedance 2k ohms
  • Level -25 dBu nom
  • Mic/Line Pad Switch +6 dBu max
• Line Input 1/8" (3.5mm) Stereo
  • Impedance 20k ohms
  • Level -10 dBu nom
• Cue Input 1/4" Mono
  • Impedance 20k ohms
  • Level -10 dBu nom
• Mix Out Balanced Male XLR
  • Level +16 dBu max
  • Frequency Response 20 Hz - 20 kHz +/- 1dB
• Line Output 1/8" (3.5mm) Stereo
  • Impedance 100 ohms
  • Level -10 dBu nom
• Headphones 1/4" Stereo
  • Impedance 8 ohms
  • Level 1/3 watt per channel
• Bluetooth Wireless Technology
  • Standard Bluetooth 3.0
  • Frequency Response Hands-Free (Full Duplex): 300 Hz– 3.4 kHz
  • Hands-Free (Full Duplex HD): 50 Hz– 7 kHz
  • A2DP (Master » Headset): 30 Hz– 17 kHz
  • Range 33 ft (10m)
• Phone Line Connector RJ11C
• Handset Connector RJ22
• Ringer 0.5B REN
• Isolation 1500 VAC
• Power 100-240 VAC, 50-60Hz External Power Supply or Two 9 VDC Batteries
• Size 9.5" x 8" x 3"
• Weight 3.8 lbs (1.72 kg)