Clear-Com
-
Clear-Com MS-702 2-Channel Headset/Speaker Main Station
The Clear-Com MS-702 is a compact, feature-laden, single rack-space intercom main station supports up to 40 RS-701 beltpacks, 10 speaker stations or 12 headset stations on two... -
HME CC-15 Headset for DX Series
CC-15 is a single-ear headset with noise-cancelling microphone for DX Series wireless intercom. CC-15-X4 is the single-ear, electret, noise-cancelling headset with 4-pin female... -
Clear-Com MS-704 4-Channel Headset/Speaker Main Station
The Clear-Com MS704 is a four intercom channels with programmable front-panel buttons. High-capacity, fail-safe power supply supports up to 40 RS-701 beltpacks or 10 speaker... -
HME WH340 2-Channel Wireless Headset
WH340 2-Channel All-in-One Wireless Headset 2.4GHz frequency range Up to 4 full-duplex or 12 half-duplex all-in-one headsets per base station Hands-free communication Single-ear,... -
Clear-Com TW-47 Clear-Com/RTS 2-Way Radio Interface
Compatible with both Clear-Com and RTS®, TW-47 connects virtually any set of walkie-talkies to anyone on the wired partyline intercom; simply use one walkie-talkie as a... -
Clear-Com FL-7 Call Signal Flasher
Call Signal Flasher Provides Visual And/Or Audible Indication of a Call Signal New LED design with dimmer. Provides both a visual and audible indication of a call signal on the... -
Clear-Com RM-702 2-Channel Headset/Speaker Station
Single rack-space, two-channel station is powered by the intercom line. Operator can talk and/or listen on either or both channels. Accepts line-level audio program input via... -
HME BS410 Base Station
The BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. The system operates in... -
Clear-Com IF4W4 4-Channel 3- or 4-Wire Camera Interface
Four channel interface connects Clear-Com to TV cameras, two-way radios, satellite links, and other communications devices through either their headset jacks or 4-wire circuits.... -
HME BP410 Wireless Beltpack
The BP410 is a rugged, light-weight, ergonomically designed beltback to be used with the BS410 base station. Single-channel operation allows any four beltpack and/or all-in-one... -
Clear-Com TR-50 Monaural IFB Talent Receiver
Monaural IFB Talent Receiver 1/8" Mini Jack Includes TS-1 An amplified single-channel talent beltpack with volume control. It connects to the Program Interrupt... -
Clear-Com PS-702 2-Channel 2-Amp Power Supply
The PS-702 can deliver 1.2 amps at 30 volts DC to two channels. This is sufficient to power up to 40 beltpacks, 10 speaker stations, or 12 headset stations even under the most... -
Clear-Com LQ-2W2 2-Channel / 2-Wire Partyline IP Interface
The LQ-2W2 enables the connection of 2-wire partyline audio devices over LAN, WAN or Internet IP infrastructures. LQ Series devices can also connect to Eclipse HX frames via... -
Clear-Com RS-703 2-Channel Dual Listen Beltpack
The Clear-Com RS-703 * is a two-channel analog beltpack with an XLR-3 line connector and XLR-4M headset connector. A mic preamp with a dynamic range of 130 db enables intelligible... -
Clear-Com KB-701 1-Channel Speaker/Microphone Station
The KB-701 remote speaker station connects to a single channel of party-line intercom and operates in half-duplex mode. It features both an integral speaker and a flush mount... -
HME BS210 Base Station
BS210 Base Station Highlights: Expandable system: enables up to four synchronized co-located base stations to be used together for a total of 44 COMMUNICATORs with up... -
Clear-Com PK-7 1-Channel 0.4 Amp Portable Power Supply
The Clear-Com PK-7 power supply will support up to 24 Que-Com headset stations and 12 RS-701 partyline beltpacks. It is line and load regulated and short-circuit protected.... -
Clear-Com RM-704 4-Channel Headset/Speaker Station
Remote station provides four independent intercom channels, with programmable front-panel buttons for versatility. Separate volume controls for each channel and four separate... -
Clear-Com CC-220 Double-Ear Light-Weight Headset (4-Pin XLR)
The CC-220 by Clear-Com is a double-ear premium light-weight headset that has high performance headphones and cardioid dynamic microphones that provide high quality audio. The... -
Clear-Com KB-702 2-Channel Headset/Speaker Station
The KB-702 remote speaker station permits the user to select between two channels of party-line communications, with the ability to talk and/or listen on the selected channel. The... -
Clear-Com LQ-4W2 2-Channel / 4-Wire Partyline IP Interface
The LQ-4W2 is a compact box that enable connection of 4-wire audio devices over LAN, WAN or Internet IP infrastructures. LQ Series devices can also connect to Eclipse... -
Clear-Com YC-36 3-Pin to 6-Pin Adapter
The YC-36 is a 3-pin to 6-pin adapter. It can combine 2 single-channel 3-pin cables into a single 2-channel 6-pin connector. This cable is for use with RS-602 ad RS-622... -
Clear-Com GM-18 Plug-In Gooseneck Microphone - 18in
The GM-18 (18" length, 46 cm) gooseneck microphones feature a gold-plated, threaded, and locking 3-conductor quarter-inch phone plug connector. A fitted windscreen is... -
Clear-Com HB-702 2-Channel Flush-Mount Headset Station
HB-702 is a selectable two-channel wall or console-mounted headset station. Microprocessor-controlled logic and switching, with momentary/latching talk button. Visual call...