KanexPro 150W Class D 2-Channel Amplifier w/ DSP and Dante

About: KanexPro 150W Class D 2-Channel Amplifier w/ DSP and Dante

Deliver network audio directly to speakers with a compact, DSP-equipped Class D amplifier featuring Dante 2-channel digital I/O. The KanexPro AUD-DTE-2CHAMP is a 150W Class D amplifier that decodes Dante network audio and drives low-impedance (4Ω/8Ω) stereo speakers or constant-voltage (70V/100V) distributed speaker lines — with balanced analog line-level I/O for legacy integration.

Built-in DSP provides 31-band graphic EQ, per-output delay (0–50ms), independent input gain and volume control, and five recallable presets. The amplifier accepts Dante PCM 2-channel audio at up to 96KHz/24-bit alongside balanced stereo line input. A rear-panel speaker impedance switch selects Lo-Z stereo (2x75W @ 4Ω/8Ω), bridged mono (1x150W @ 8Ω), or Hi-Z constant voltage (1x150W @ 70V/100V). Control via RS-232, LAN, and Web GUI. 5–12V trigger input and auto standby for energy-efficient installations. Half-rack/full-rack mountable.

• Dante 2-channel digital audio input and output (PCM, 44.1K–96KHz, 16/24-bit) for seamless networked audio distribution
• Balanced or unbalanced stereo line-level analog input and output (max 2Vrms) for integration with legacy analog sources and processors
• Class D amplifier delivers 2x75W @ 4Ω/8Ω stereo, 1x150W @ 8Ω bridged mono, or 1x150W @ 70V/100V constant voltage
• Rear-panel speaker impedance switch selects Lo-Z (4Ω/8Ω) or Hi-Z (70V/100V) output mode without reconfiguration
• Built-in DSP with 31-band graphic EQ (−10 to +10dB), per-output delay (0–50ms), independent input gain and master volume control
• Five recallable presets store complete audio configuration for rapid scene switching in multi-use spaces
• 5–12V trigger input for external mute control; auto standby (0–120 min) for energy-efficient operation
• Control via RS-232 (115200 baud), LAN (Web GUI), and TCP/IP (port 8000) — half-rack/full-rack mountable

Specifications

• Technical
  • Amplifier Type: Class D, 150W max
  • Output Power
    • 2x75W @ 4O/8O
    • 1x150W @ 8O bridged
    • 1x150W @ 70V/100V
  • Input Sensitivity: Full power @ 0.775V (0dBu)
  • Max Voltage Gain: 27–30dB SE / 39–42dB BTL
  • Frequency Response: 20Hz–20kHz @ ±3dB
  • Signal to Noise Ratio: 87dB, 20Hz–10kHz
  • THD+N: 0.04% (1kHz @ 1W)
  • Audio Format
    • LINE IN: Analog, Balanced 2CH, Max 2Vrms
    • LINE OUT: Analog, Balanced 2CH, Max 2Vrms
    • DANTE: Digital 2x2 in/out, PCM 2CH 44.1K–96kHz 16/24-bit
    • AMP OUT: Analog, Balanced 2CH, Max 24.5Vrms; 70V/100V
    • AMP OUT: Analog, Unbalanced 1CH
  • Control: RS-232, Web GUI, LAN (TCP/IP)
  • ESD Protection: ±8kV (air-gap) / ±4kV (contact) — Human-body Model
• Connection
  • Input
    • 1x LINE IN (5-pin 3.81mm Phoenix)
    • 1x DANTE (RJ45)
  • Output
    • 1x LINE OUT (5-pin 3.81mm Phoenix)
    • 1x 4/8O AMP OUT (4-pin 5.08mm locking Phoenix)
    • 1x 70V/100V AMP OUT (4-pin 5.08mm locking Phoenix)
  • Control
    • 1x RS-232/TRG (5-pin 3.81mm Phoenix)
    • 1x LAN (RJ45)
• Power
  • Power Supply: AC 100–240V 50/60Hz
  • Power Consumption: 240W (Max)
• Environmental
  • Operating Temperature: 32–104°F / 0–40°C
  • Storage Temperature: -4–140°F / -20–60°C
  • Humidity: 20–90% RH (non-condensing)
• Mechanical
  • Housing
    • Front: Aluminum
    • Rear: Metal Enclosure, Black
  • Dimensions (WxDxH): 9.45 x 8.27 x 1.73 inch
  • Weight: 4.14 lbs

What's in the Box

• 1x 150W Class D Amplifier
• 3x 5-pin 3.81mm Phoenix Connectors (male)
• 2x 4-pin 5.08mm Phoenix Connectors (male)
• 6x Mounting Ears
• 24x Machine Screws
• 1x AC Power Cord (100–240V, 1.5m)
• 1x Product Manual