Q-SYS AC-C8T 8in Compact In-Ceiling Speaker (Pair)

About: Q-SYS AC-C8T 8in Compact In-Ceiling Speaker (Pair)

QSC AcousticCoverage™ is designed to offer sound system designers and installers a cost effective solution for applications where voice reinforced coverage is of primary concern, while providing improved musicality often not seen in typical paging or BGM class products.  Achieveing remarkable performance for the cost, AcousticCoverage is ideally suited for wide area deployments such as office buildings,  healthcare facilities, transportation terminals, and other cost sensitive installations.

AC-C8T Features:

• High quality transducers provide exceptional clarity through the critical voice range.
• Improved musicality often not seen in typical BGM class products.
• Ported baffle for increased low frequency extension down to 52 Hz.
• Low saturation 70/100V transformers with 8 ohm bypass.
• 4-pole Euroblock connector eases system wiring.
• Advanced voicing via QSC Intrinsic Correction™, applied using the Q-SYS networking platform or CXD Series Amplifiers.
• White (RAL 9010) with UV inhibitors to match complimenting QSC product families.
• Complete EASE, CF2, CAD, & BIM information available online.

Specifications AC-C8T:

• Effective frequency range: 52 Hz – 20 kHz
• Rated noise power / voltage: 80 watts / 25.3 volts (rms)
• Broad-band sensitivity: 89 dB SPL
• Coverage angle (-6 dB): 100° (500 Hz to 5 kHz)
• Maximum continuous SPL: 108 dB
• Maximum peak SPL: 114 dB
• Rated impedance: 8 ohms
• Transformer taps:  
  • 70 V: 60, 30, 15, 7.5, 3.8 watts and 8-ohm bypass
  • 100V: 60, 30, 15, 7.5 watts and 8-ohm bypass
• HF Transducer: 22 mm [.86 in] silk dome tweeter, coaxially mounted
• LF Transducer: 210 mm [8 in] Polypropylene cone with butyl rubber surround
• Input connector type: Euroblock connector with parallel output terminals
• Baffle material: Painted ABS polymer
• Grille material: Painted steel
• Back can material: Plated steel
• Testing: Listed UL1480, UL2043 safe for use in air handling space
• Net weight: 5.2 kg [11.5 lb]
• Product dimensions: Ø316 x 288 mm [Ø12.4 x 11.3 in]
• Cut-out Dimensions: Ø285 mm [Ø11.2 in]
• Ceiling Capture Thickness: 6 - 38 mm [0.25 - 1.5 in]
• Shipping weight: 13.3 kg  [29.3 lb]  (pair packed)
• Shipping dimensions: 743 x 381 x 381 mm  [29.3 x 15 x 15 in]
• Included accessories: Rails & C-ring for ceiling tile installation