Menu

Free shipping on most orders over $199!*

COVID19 Update - Showroom Closed / Curbside Available

AtlasIED FAP62T 6in 32W Coaxial In-Ceiling Speaker (70V/8ohm)

Model: FAP62T

AtlasIED FAP62T 6in 32W Coaxial In-Ceiling Speaker (70V/8ohm)
AtlasIED FAP62T 6in 32W Coaxial In-Ceiling Speaker (70V/8ohm)
  • Free Shipping on orders over $199
  • Not In-Stock - Available to Order 
  • Not yet reviewed




About: AtlasIED FAP62T 6in 32W Coaxial In-Ceiling Speaker (70V/8ohm)

Model FAP62T coaxial ceiling loudspeaker package will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system. These High performance systems are perfectly suited for many business music and public address applications. Compact profile enclosures and wide dispersion make the FAP62T a perfect choice for low ceilings.

The loudspeaker's components match the performance of the legendary AtlasIED Strategy Series II FA Series. High quality construction of the 1" voice coil drivers include polypropylene cones with a butyl rubber surround. The19mm coaxially mounted tweeter is constructed of durable PEI. The high sensitivity of the loudspeaker means less power may be required to achieve the desired SPL. The loudspeakers are factory assembled to an optimally tuned & ported deep drawn enclosure and include a specially designed low saturation 70.7V/100V transformer. A convenient front mounted switch allows tap selection without the need to remove the loudspeaker from the ceiling. Uniquely designed "easy access" input panel design allows for "thru" conduit runs using flexible or rigid conduit.
A detachable Phoenix style, locking four-pole connector provides for easy daisy chain wiring to other full range loudspeakers or AtlasIED FAPSUB subwoofers. Attractive press-fit grille blends seamlessly into contemporary architecture.

Mounting is simplified with Strategy Series II style "dog leg" tabs that allow easy installation into
drop tile or drywall ceilings with provided tile bridge assembly. The tile bridge consists of (2) triangular
formed mounting rails and a c-ring assembly. The c-ring can be attached to the rails with the screws provided to extend support to the t-bar grid in suspended ceiling applications. Multiple hole locations are provided to allow the c-ring to be positioned all the way to the outer edge the tile if necessary. For existing dry-wall applications the tile bridge c-ring and support rails can be inserted into the hole cut for the enclosure. For easy positioning the "V" shaped support rails match the shape of the C-ring tabs for easy maneuvering and location when working "blindly" above the deck. For new construction drywall ceiling applications the optional model FAP62-TR trim ring is available. This unit provides a marked location for drywall installers to cut around essentially reserving the desired location in the ceiling until final installation of loudspeaker. Mounting holes are provided to accommodate 16" or 24" OC stud/joist mounting.

FEATURES

  • 4 Pole Detachable "Phoenix" Style Connector Allows Easy Pre-Wiring and is Convenient for Daisy Chaining Additional Strategy Full Range Speakers or Subwoofers
  • Easy Installation in Drop Tile or Sheetrock Ceilings via C-ring/V-rail Tile Bridge and "Dog Leg" Mounting System (Included)
  • Enhanced Quality 70.7V/100V Internal Transformers Minimize Insertion Loss and Maintain Low Frequency Response While Providing increased Output for Higher SPL Applications
  • Extended Low Frequency Response from the 285 Cubic Inch Optimally Tuned and Ported Deep Drawn Galvanized Steel Enclosure
  • Front Mounted Tap Selector Switch for Easy System Tuning Adjustments Includes Transformer Bypass Setting for 8 ohm Direct Coupled Operation
  • "Press Fit" Grilles Blend Better into Contemporary Architecture
  • Unique "Trap Door" Input Section Allows for Through Conduit Runs with Rigid or Flex Conduit

SPECIFICATIONS

  • SPEAKER TYPE Coaxial
  • SENSITIVITY 88dB Average
  • POWER TAPS 2, 4, 8, 16, 32 Watts & 8Ω
  • FREQUENCY RESPONSE 63Hz - 20kHz
  • DEPTH 8 1/2" (21.5392 cm)
  • SHIPPING WEIGHT 15.50 lbs (7.03 kgs)
  • CERTIFIED TO SAFETY LISTING UL 1480

Reviews: AtlasIED FAP62T 6in 32W Coaxial In-Ceiling Speaker (70V/8ohm)

There are currently no product reviews.


Warranty: AtlasIED FAP62T 6in 32W Coaxial In-Ceiling Speaker (70V/8ohm)

AVShop.ca Warranty:

30 Days

Manufacturer's Warranty:

Passive Loudspeaker Products

  5-Years
Line Array and Line Column Loudspeakers 5-Years
Loudspeaker Hardware 5-Years
Passive Attenuators & Volume Controls 5-Years
Classroom Security & Sound Reinforcement Systems 1-Year
Classroom Security & Sound Reinforcement Accessory Microphones 90-Days
Amplifiers, Mixer/Amplifiers & TSD Series Amplifiers 3-Years
BlueBridge® Digital Signal Processors 3-Years
BlueBridge® DSP Wall Controllers 1-Year
Sound Masking Electronics 3-Years
MTX Home and Pro Loudspeakers 1-Year
Electronic Accessories, PSUs & Telephony Products 90-Days
Metal Rack & Cabinet Products 5-Years
Active Rack Accessories 1-Year
AC Power Conditioners, Sequencers, & Distribution Units 1-Year
Interconnects & Accessories 5-Years
Microphone Stands (Except Musician Series) 2-Years
Musician Series Microphone Stands 1-Year
Microphone Stand Accessories 90-Days
Replacement Parts 1-Year
VoIP Loudspeakers 1-Year
VoIP Devices 1-Year
Fuses, Lamps, Batteries No Warranty
5400 Series Controllers, Communication Stations, & Amplifiers (GLOBALCOM®) 3-Years
1500 Series PoE Compact Power Amplifiers 3-Years
ACS Series Controllers, Communication Stations, & Accessories (GLOBALCOM®) 3-Years
Titan DSP Mainframes & Accessories 3-Years