JBL Control 29AV-1 Indoor/Outdoor Monitor Speaker (Each) - White

About: JBL Control 29AV-1 Indoor/Outdoor Monitor Speaker (Each) - White

The Control® 29AV-1 provides improved voicing for extremely fl at, high fi delity performance, extended bandwidth and well-controlled defi ned coverage from a compact loudspeaker.

Features:

• Extended bandwidth, extremely smooth frequency response.
• 110° x 85° HF coverage, rotatable horn.
• 110 W transformer for 70 V or 100 V lines, with 8 W thru.
• SonicGuard™ overload protection.
• 200 mm (8 in) Kevlar cone woofer,
• 25 mm (1 in) titanium diaphragm compression driver.
• Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket.
• Sealed input panel cover and screwdown input terminals.

Specifications:

Frequency Range    :    37 Hz –18 kHz  (-10 dB)

Power Capacity    :    300 W Continuous
Program Power  150 W Continuous
Pink Noise

Transformer Taps    :    70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W, Thru Position: 8 ohms nominal

Frequency Response    :    45 Hz – 18 kHz ( ± 3 dB)

Maximum SPL @ 1m    :    Short-Term: 120 dB; Long-Term: 114 dB

Nominal Sensitivity    :    90 dB (2.83V / 1m)

Nominal Coverage Angle    :    110° H x 85° V, rotatable

Directivity Factor (Q)    :    7.2 dB, averaged 500 Hz to 16 kHz

Directivity Index (DI)    :    8.6 dB, averaged 500 Hz to 16 kHz

Nominal Impedance    :    8 ohms

Minimum Impedance    :    6.3 ohms @ 230 Hz

Crossover Network    :    3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency

Low Frequency    :    200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former

High Frequency    :    25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround

Enclosure Material    :    High impact polystyrene

Grille    :    Thermoset composite coated steel, WeatherMax multi-layer foam

Overload Protection    :    Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.

Environmental    :    IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.

Terminations    :    Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).

Safety Agency Rating    :    Transformer is listed per UL1876

Colors    :    Black or white (-WH)

Dimensions (H x W x D)    :    520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)

Net Weight (ea)    :    12.2 kg (26.8 lb.)

Shipping Weight (ea)    :    14.0 kg (30.8 lb.)

Included Accessories    :    1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.