Interfaces
-
Clear-Com TWC-701 Intercom Channel Combiner (No Box)
2-Channel, 3-Pin XLR Cable Adapter, combines two intercom channels on a single 3-pin cable for beltpacks with the TW option -
Studio Technologies Model 45DC Dante to Partyline Interface
The Model 45DC Dante to Dual Party-Line Intercom Interface is designed for applications that utilize single-channel analog party-line (PL) intercom technology. The unit provides... -
Clear-Com TW-47 Clear-Com/RTS 2-Way Radio Interface
Compatible with both Clear-Com and RTS®, TW-47 connects virtually any set of walkie-talkies to anyone on the wired partyline intercom; simply use one walkie-talkie as a... -
Clear-Com TWC-701 Intercom Channel Combiner
2-Channel, 3-Pin XLR Cable Adapter, combines two intercom channels on a single 3-pin cable for beltpacks with the TW option -
Clear-Com LQ-4W2 2-Channel / 4-Wire Partyline IP Interface
The LQ-4W2 is a compact box that enable connection of 4-wire audio devices over LAN, WAN or Internet IP infrastructures. LQ Series devices can also connect to Eclipse... -
Clear-Com IF4W4 4-Channel 3- or 4-Wire Camera Interface
Four channel interface connects Clear-Com to TV cameras, two-way radios, satellite links, and other communications devices through either their headset jacks or 4-wire circuits.... -
Clear-Com LQ-2W2 2-Channel / 2-Wire Partyline IP Interface
The LQ-2W2 enables the connection of 2-wire partyline audio devices over LAN, WAN or Internet IP infrastructures. LQ Series devices can also connect to Eclipse HX frames via... -
Clear-Com TW-12C Clear-Com/RTS System Interface
TW-12C connects a single channel of intercom from one system to another. Opt isolation eliminates hums and buzzes. Compensates for level and impedance differences between systems.... -
Clear-Com EF-701M 4-Wire Interface
The EF-701M interface converts a single channel of standard or TW partyline intercom to four-wire audio, while also converting call signals to RS-422 data (and back). The... -
Clear-Com LQ-R4W8 8-Channel / 4-Wire Partyline IP Interface
The LQ-R4W8 enables the connections of 4-wire audio devices over LAN, WAN or Internet IP infrastructures in a 1RU panel. LQ Series devices can also connect to Eclipse... -
Clear-Com LQ-R2W4 4-Channel / 2-Wire Partyline IP Interface
The LQ-R2W4 enables the connection of partyline audio devices over LAN, WAN or Internet IP infrastructures in a 1RU panel. LQ Series devices can also connect to Eclipse... -
Clear-Com LQ-R2W4-4W4 8-Channel / 4x4, 2x2-Wire Partyline IP Interface
The LQ-R2W4-4W4 enables the connection of both partyline and 4-wire audio over LAN, WAN or Internet IP infrastructures in a 1RU panel. LQ Series devices can also connect to... -
JK Audio BlueSet F4 Bluetooth Headset Interface (4-Pin XLRf)
These headset interfaces plug directly into most Party- Line (PL) belt packs, replacing the wired headset. A 3.5 mm stereo headset jack contains a mic level output signal suitable... -
Studio Technologies Model 43D Dante to IFB Interface
The Model 43D IFB Interface provides broadcast-standard powered and non-powered analog audio IFB outputs from audio signals that are being transported using the Dante®... -
Studio Technologies Model 45DR Dante to Partyline Interface
The Model 45DR Dante to 2-Channel Party-Line Intercom Interface is designed for applications that utilize 2-channel analog party-line (PL) intercom technology. This type of...