RDL
-
RDL STA-2A Dual High Gain Line Amplifiers
The STA-2A is a dual-channel, line-level audio preamplifier. Each channel is identical. The audio inputs are bridged at 20 kΩ and accept either an unbalanced or a balanced... -
RDL D-RLC10K Remote Level Control
The RLC10K is the ideal companion to the RDL VCA modules where levels are to be controlled from a single remote location. It is designed to directly interface with the 3-wire... -
RDL SF-DN4 Digital Audio to Dante Interface
The SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels. The SF-DN4 automatically detects a valid input on any... -
RDL SF-PA50A 50W 70V Mono Audio Amplifier
The SF-PA50A is a 50 Watt audio power amplifier that converts one analog input to a 70 V or 100 V constant voltage amplified output. An analog audio source may be connected to... -
RDL Bi-Directional 2x2 Mic/Line Dante Interface
The DD-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two... -
RDL TX-TPR3A Active Three-Pair Format-A Receiver
The TX-TPR3A is a three-pair audio receiving module compatible with RDL Format-A twisted pair products. Three outputs are provided corresponding to the three signal pairs A, B and... -
RDL ST-UBA2 Unbalanced to Balanced Amplifier - 2 channel
The ST-UBA2 is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance audio from CD players,... -
RDL ST-RX2 Audio Routing Switcher - 1x2
The ST-RX2 has a single line-level audio input and two line-level audio outputs. In the absence of a control input, the NORMAL module output is fed from the audio input. When the... -
RDL TX-TPR1A Active Single-Pair Format-A Receiver
The TX-TPR1A is a single-pair audio receiving module compatible with RDL Format-A twisted pair products. A front-panel switch set during installation determines which of the three... -
RDL ST-SSR1 Line-Level Audio Switch - 2x1
The ST-SSR1 was designed for absolute silent switching of audio signals. It supports two balanced line-level inputs and one balanced output. Each can be used unbalanced as well.... -
RDL STA-1 Dual Balanced/Unbalanced Line Amplifier
The STA-1 is a dual-channel line-level preamplifier with bridging inputs, adjustable gain or loss, and low-impedance outputs. Each of the two identical circuits is both an... -
RDL SF-UN1 USB to Dante Network Interface
The SF-UN1 is a digital audio interface that converts a USB stereo digital audio source to two Dante network audio channels. The SF-UN1 automatically detects a valid USB input.... -
RDL SF-ND2 Dante to Digital Audio Interface
The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on... -
RDL SF-XMN4 Microphone to Dante Interface
The SF-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the SF-XMN4. Each XLR input is... -
RDL SF-NH1 Dante to Stereo Headphone Amplifier
The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The output connects through a... -
RDL DB-CIJ3 Consumer Input Wallplate - Mono Output
The DB-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line. The... -
RDL ST-ACR2 Line-Level Audio Controlled Delay Relay
The ST-ACR2 is an Audio Controlled Relay in the STICK-ON® series. These products are designed for quick, convenient installation, and reliable operation in a variety of... -
RDL TX-PCR1 Paging Controlled Relay
The TX-PCR1 is the ideal choice in many applications where switching needs to be controlled from a constant-voltage amplified audio source. The module will trigger on any program... -
RDL STD-600 Passive Audio Divider/Combiner
Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits... -
RDL SF-NP16E PoE+ Dante to 16W Mono Audio Amplifier - 70V
The SF-NP16E is an audio power amplifier that converts one Dante network audio channel to a 70 V or 100 V constant voltage amplified output. The output provides 16 watts for a... -
RDL FP-NML2P Dante to Mic/Line Interface w/ PoE
The FP-NML2 modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in... -
RDL DD-BN40 Bi-Directional 4x2 Mic/Line Dante Interface
The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable... -
RDL TX-TPS3A Active Three-Pair Format-A Sender
The TX-TPS3A is a three-pair audio sending module compatible with RDL Format-A twisted pair products. Three line-level sources may be connected to the module, each using either... -
RDL RU-MLB4 Mic/Line Bi-Directional Dante Interface
The RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be...