Electro-Voice LRC-1060 Line Radiator Column Loudspeaker - 0.6m (White)

About: Electro-Voice LRC-1060 Line Radiator Column Loudspeaker - 0.6m (White)

The LRC-1060 Line Radiator Column Loudspeaker is a passive column loudspeakers engineered specifically for installation. LRC loudspeakers are simple, practical, and easy to install, offering a sleek, neutral industrial design that blends into a wide range of settings. LRC loudspeakers can play a role in any install as main speakers, support speakers, and foreground and background speakers.

• 22.8” (580 mm) high
• Six 2.5-inch full-range drivers coupled to proprietary PaSS phase plugs produce a narrow vertical pattern and exceptional LF extension.
• 2x 2.5” (63.4 mm) passive radiators
• Fixed 20° symmetrical vertical pattern.
• 130° horizontal coverage
• 75 Hz-15 kHz
• 122 dB SPL (peak)
• Lo-Z, 8 ohms, 200W program
• 70/100V
• Weatherized for full exposure, including IP56c rating, and EN54-24 Type B certified for all-weather applications.
• SwifTilt Pan-Tilt mounting bracket (patent pending) supports most mounting situations and installs column as close to the mounting surface as possible.
• Includes rear insert points for suspension.

The LRC series expands the Electro-Voice installed sound portfolio with three passive column loudspeaker models – the LRC-1060, LRC-1100 and LRC-2100. Based around purpose-built 2.5” drivers and proprietary PaSS dispersion control technology, all models provide carefully controlled vertical dispersion and smooth frequency response for environments where both audio quality and clean aesthetics are required.

LRC-1060 loudspeakers include a pre-installed transformer for connection to 70- or 100-volt lines. These models include EV’s patented Automatic Saturation Compensation (ASC) technology, which preserves low frequency response and protects system electronics from improper electrical loads when the transformer is engaged - regardless of the number of speakers connected to the line.

An integral part of LRC offering is the mounting bracket that ships with each loudspeaker. It has been carefully designed to cover most mounting situations, whether the column needs to be positioned with no tilt and as close to the wall as possible, tilted downward, inverted for up-tilt, panned to either side, or aimed with a combination of pan and tilt.

LRC Line Radiator Columns are engineered for use on any system using the recommended high-pass filter, but deliver their best performance when paired with Dynacord DSP matrix processors and amplifiers. These provide dedicated presets which ensure the optimal balance of sound quality, output, and system protection. All models are available in black and white and are suitable for indoor or outdoor use.

LRC-1060 loudspeakers are EN54-24 certified, and all models are supported by EASE/EASE Focus3, PREVIEW Loudspeaker Software and by SONICUE System Software.

SIMPLICITY, PRACTICALITY AND FLEXIBILITY

The LRC design concept is focused on easy installation, with a range of integrator-friendly features. Passive designs with integrated 70/100V + Lo-Z transformers (LRC-1060 & LRC-1100) avoid the complexity of external Hi-Z adapters or active steerable systems. The patent-pending SwifTilt System incorporates a super-compact, multi-function flush/pan/tilt bracket that enables all LRC models to be mounted as close to the wall as possible, in any scenario – all while keeping cables and hardware out of sight.

BIG SOUND THAT BLENDS INTO THE BACKGROUND

Available in white or black paintable enclosures suitable for indoor or fully outdoor environments, these sleek, aesthetically matched speakers blend easily into their surroundings while providing exceptional all-around audio performance for main, delay or distributed sound reinforcement duties in houses of worship, outdoor performance structures, hospitality venues, mass transit, commercial interiors and more – maximum audio performance with minimal visual impact. Whereas other currently available column systems may compromise sound quality to achieve the desired coverage in larger spaces, the LRC series has been holistically designed to offer a high-performance combination of both elements that sets a new benchmark for the format.

BEST-IN-CLASS SOUND QUALITY, COVERAGE AND BASS OUTPUT

LRC driver and waveguide configurations are optimized for smooth, full-bandwidth clarity and coverage in large and/or reverberant areas, with key features that allow output to be precisely tailored to the space. All models include EV’s proprietary PaSS technology featuring custom-designed phase plugs to extend lobe-free high-frequency output beyond the range of human speech, maximizing intelligibility.

Specifications

• Frequency range (-10 dB): 70 Hz - 15000 Hz
• Maximum SPL: 122 dB
• Axial sensitivity: 90 dB SPL 1W/1m
• Coverage angle HxV: 130° x 20°
• Power handling (continuous): 100 W
• Power handling (program): 200 W
• Peak input voltage (Lo-Z): 80 V
• Nominal impedance (Lo-Z): 8 Ω
• Minimum impedance (Lo-Z): 8.5 Ω at 400 Hz
• Recommended high-pass: ≥70 Hz Butterworth, 24 dB/oct
• Transformer taps 70 V line: 60 W; 30 W; 15 W; 8 W; 4 W
• Transformer taps 100 V line: 60 W; 30 W; 15 W; 8 W
• Transducer (quantity) size
  • (6) 2.5 in active drivers
  • (2) 2.5 in passive radiators
• Connector type
  • 4-pin Euroblock
  • Input + Pass through
• Wire size: 12AWG (maximum)
• Suspension points: (2) M8
• Mounting: SwifTilt Multi-angle Tilt + Pan Bracket
• Maximum horizontal pan angle: +/- 80° (at all down-tilt angles)
• Vertical down-tilt angles: 0°, 2.5°, 5°, 7.5°, 10°, 15°, 20°, 25°
• IP rating: FW (outdoor full exposure), IP56c
• Color: RAL 9003 Signal white
• Dimensions (HxWxD): 22.83 x 4.13 x 5.67 in (580 x 105 x 144 mm)
• Weight: 9.70 lb (4.40 kg)

What's Included

• Tilt bracket
• Pan bracket
• Gland nut weather cover
• Dual-ended Allen key
• M8x20 mm eyebolt (pre-installed)