Accessories
-
Q-SYS SPA Plenum Kit
Plenum kit to safely mount SPA amplifier inside a plenum or air handling space. -
Q-SYS QIO-RMK QIO Rackmount Tray with Blanking Panels
QSC Q-SYS QIO-RMK Rackmount panel for enables the a rackmounting solution for up to four QIO series network expanders. Includes blank panels for unused positoins. -
RDL ST-VCA3 Voltage Controlled Amplifier
The ST-VCA3 is used in applications requiring smooth audio level control from a remote control panel, potentiometer or dc voltage (0 to 10 V). Installation in series with the... -
TOA Canada RC-001T Remote Control Module
The RC-001T is an interface module to connect between the 9000M2 Series amplifier and the ZM-9011, ZM-9012, ZM-9013, or ZM-9014 Remote control panel of data communication type. Up... -
TOA ML-11T Mic/Line Input for 900 Series Amps
The ML-11T is a microphone/line input module to be used in conjunction with the 900 series components and other TOA's equipment. It has a balanced microphone/line input with... -
RDL TX-TPR3A Active Three-Pair Format-A Receiver
The TX-TPR3A is a three-pair audio receiving module compatible with RDL Format-A twisted pair products. Three outputs are provided corresponding to the three signal pairs A, B and... -
RDL TX-TPR1A Active Single-Pair Format-A Receiver
The TX-TPR1A is a single-pair audio receiving module compatible with RDL Format-A twisted pair products. A front-panel switch set during installation determines which of the three... -
RDL TX-PCR1 Paging Controlled Relay
The TX-PCR1 is the ideal choice in many applications where switching needs to be controlled from a constant-voltage amplified audio source. The module will trigger on any program... -
RDL TX-TPS3A Active Three-Pair Format-A Sender
The TX-TPS3A is a three-pair audio sending module compatible with RDL Format-A twisted pair products. Three line-level sources may be connected to the module, each using either... -
RDL ST-LCR3 Logic Controlled Relay - Dual Alternate Pulse
The ST-LCR3 is ideally suited to applications where momentary pulses are needed from a single control signal. The module provides a momentary pulse when a logic signal at its... -
Q-SYS QIO-PSU Power Supply
The QIO-PSU is a re-branded MEAN WELL GST90A24. The output voltage is 24V with a rated current of 3.75A, and a maximum output of 90W. The QIO-PSU is capable of powering up to four... -
Allen & Heath Wall/Glass Mount Bracket for CC-7 or CC-10
Wall/glass mounting bracket for the CC-7 or CC-10 Touch Panel.
-
TOA Canada N-SP80SB Standalone PCB SIP Board
N-SP80SB is a SIP-compliant hands-free Voice over IP (VoIP) PCB board that offers flexible audio communications using standard SIP protocol for parking facilities,... -
TOA M-800RC Remote Audio Control Panel for M-8080D-AM (Black)
Designed for exclusive use with the M-8080D, the M-800RC Remote Audio Control Panel has a volume/routing control knob. Input/Output signal routing Volume control Direct power... -
Atlona Rack Mount Shelf for OmniStream
The Atlona AT-OMNI-1XX-RACK-1RU is a 1U, full rack width shelf accessory that provides easy mounting and organization of two OmniStream Pro or R-Type encoders or... -
TOA M-800RC Remote Audio Control Panel for M-8080D-AM (White)
Designed for exclusive use with the M-8080D, the M-800RC Remote Audio Control Panel has a volume/routing control knob. Input/Output signal routing Volume control Direct power... -
TOA BX-41S Cover Lockbox for MW-41BT
Steel lockbox with key specifically designed for the MW-41BT audio interface. Built for indoor use it is water splash resistant with interior gasket Operating Temperature...