JBL Control 50S/T Surface-Mount Subwoofer (Each)

About: JBL Control 50S/T Surface-Mount Subwoofer (Each)

The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance. The Control 50S/T’s included two-piece easy-mount wall-bracket installs quickly: The multi-point wall portion of the bracket attached to the wall and the self-guiding speaker-mounted bracket drops into place for a secure attachment. A cover over the Control 50S/T terminal cup keeps wiring neat. The Control 50S/T is mono. The crossover network built into the subwoofer provides proper signal routing and four satellite output connectors allow connection of the wires for the four Control 52 satellite loudspeakers. A Loop Out connector is also provided on the subwoofer for looping the full-range input signal to other loudspeakers or to other subwoofer/satellite systems.

The Control 50 Series subwoofer-satellite loudspeaker system provides high fidelity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high fidelity foreground/background music is required from surface- mount system.

Features

• Full bandwidth 32 Hz – 20 kHz high fidelity sound
• Selectable 70V/100V for distributed lines, or low impedance
• Versatility for either two or four satellite speakers per system
• Available in black or white

Specifications

• Frequency Range (-10dB) -  32 Hz – 200 Hz
• Frequency Response (±3 dB) -  50 Hz – 150 Hz
• Power Capacity -  300 Watts Continuous Program Power (2 hrs)150 Watts Continuous Pink Noise (2 hrs)200 Watts Continuous Program Power (100 hrs)100 Watts Continuous Pink Noise (100 hrs)
• Sensitivity -  95 dB (near corner), 89 dB (center of wall)
• Maximum SPL (1m) -  115 dB average, 121 dB peak (near corner)109 dB average, 115 dB peak (center of wall)
• Impedance -  8 ohms (in bypass/thru mode)
• Transformer Taps -  80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
• Drivers -  200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
• Input Connectors -  Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
• Enclosure -  Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
• Dimensions (H x W x D) -  Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)Wall Bracket: 15 mm (0.6 in) deep
• Mounting Hardware -  2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
• Net Weight (each) -  9.0 kg (20 lbs)
• Shipping Weight -  10.2 kg (23 lbs)
• Grille -  Zinc-plated steel
• Included Accessories 
  • Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker
  • terminal cover
  • 6 pcs 2-pin locking connectors
  • M6 screw for safety lanyard attachment