Crown CDi DriveCore 2|300 2-Channel 300W 8ohm/70V Amplifier
Model: CDI2X300
About: Crown CDi DriveCore 2|300 2-Channel 300W 8ohm/70V Amplifier
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 2|300 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier
DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration
- Input Router
- Input Delay – Up to 1000ms
- Input Parametric EQ – 8 band
- Crossover
- Output Parametric EQ – 8 band
- Output Delay – Up to 100ms
- LevelMAX™ Limiter
Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.
Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.
GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.
Output Power: Dual Mode - All Channels Driven
| CDi DriveCore Model | Channels | 2Ω | 4Ω | 8Ω | 16Ω | 70Vrms | 100Vrms |
| 2|300 / 2|300BL | 2 | 150W | 300W | 300W | 150W | 300W | 300W |
| 4|300 / 4|300BL | 4 | 150W | 300W | 300W | 150W | 300W | 300W |
| 2|600 / 2|600BL | 2 | 300W | 600W | 600W | 300W | 600W | 600W |
| 4|600 / 4|600BL | 4 | 300W | 600W | 600W | 300W | 600W | 600W |
| 2|1200 / 2|1200BL | 2 | 850W | 1200W | 1200W | 600W | 1200W | 1200W |
| 4|1200 / 4|1200BL | 4 | 850W | 1200W | 1200W | 600W | 1200W | 1200W |
UPC: 691991006418
Reviews: Crown CDi DriveCore 2|300 2-Channel 300W 8ohm/70V Amplifier
Warranty: Crown CDi DriveCore 2|300 2-Channel 300W 8ohm/70V Amplifier
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
Most Crown amplifiers are guaranteed by Crown's 3 year no-fault full warranty. With this No-Fault protection your new Crown amplifier is guaranteed to meet or exceed original specifications for the first three years of ownership. During this time, if your amplifier fails for any reason it will be repaired or replaced at our expense. This includes parts, labor, and round-trip shipping (ground transport). This also applies to IQ System and PIP products.
Exceptions:
- iTHD, MAi and CTsB (current modified version in production since August 2010) will offer a 5 year standard warranty.
- LPS series, 135MA, 160MA, and 140MAx pack have a 1 year limited warranty.
NOTE: for a modest fee Crown will extend that protection for an additional three years with our 3+3 No-Fault Extended Full Warranty (amplifiers only).
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
