Free shipping on most orders over $199!*

Ashly FX-60.4 1/2U DSP Amplifier 4 x 60W

Model: FX-60.4

Ashly FX-60.4 1/2U DSP Amplifier 4 x 60W
Ashly FX-60.4 1/2U DSP Amplifier 4 x 60W
  • Free Shipping!
  •  Available - Approx 3 Day Lead Time 
  • Not yet reviewed

More models to choose from:

2 x 60W$999.00
4 x 60W$1,449.00
2 x 125W$1,299.00
4 x 125W$1,599.00
2 x 500W/400W$2,299.00
4 x 500W/400W$2,899.00

About: Ashly FX-60.4 1/2U DSP Amplifier 4 x 60W

The FX-60.4 Compact Class D Power Amplifier is a 4-channel configuration of Class D design housed in a 1/2 RU metal chassis with a metal front. The front panel is equipped with multi-color LED indicators for Status, Input, Output, Network & WiFi.

The amplifier's rear panel is equipped with 4 x mono Unbalanced phono connectors as well as 4 x 3.5mm removeable Balanced Euroblock connectors for each input. There is also be a removeable 8-pin 3.5mm Euroblock connector for GND(T),Standby/Mute polarity, GND(V) VC1, VC2, VC3/TIn, VC4/TO & 3.3V, all assignable in software. The four speaker outputs are on 2 x 4-pole 4.6mm removeable Euroblock (one for each channel pair), with either the LowZ or HiZ terminals used (depending on the selected power mode).Their is a 2-channel SPDIF stereo digital Input & Output,  both on RCA phono connectors, used for digitally bridging two FX amps. There is also an RJ45 Ethernet adapter for network connectivity, and  WiFi function is also available. The rear and side panels are perforated and a single variable-speed fan is mounted internally for side-to-rear airflow to enable proper cooling. There is an IEC power connection and the unit shall be supplied with the region-appropriate power cable.

The amplifier has a built-in 4-channel DSP that is accessed via a browser-enabled device via Ethernet or WiFi. The DSP is a 4 In x 4 Out configuration for this model. All unit settings may be accessed and edited via this GUI interface. The adjustable parameters includes gain, metering, input source select for each input (Mic/Line or Generator). Zones with Input channel select, Compression, VC volume & GPI assignments per zone. Output settings include: Routing, 10-band parametric EQ, Delay & Speaker Pre-sets (including: Crossover/Gain, Speaker EQ, FIR Filters, Driver Alignment Delay, Polarity, Limiter & Amp Outputs Mode) per output. General Settings include: System & Device info, Backup & Restore, Power Management (Standby & Sleep/wake functions may be set to manual/remote or automatic), GPIO assignments, LAN & WiFi.

The amplifier has4 amp channels each capable of driving up to 60W @ 4 or 8 Ohms per channel and may be switched to operate at 70V or 100V with 2 x 120W by bridging pairs. All channels are capable of power-sharing, driving up to 250W total across four channels or with a single channel driven. The amplifier is a universal power supply capable of operating from 100-240VAC 50/60Hz and will have a power consumption @ 1/8 continuous rated output of 75W @ 4 Ohms.

FX Series

  • The FX series is a range of multi-purpose installation DSP-equipped amplifiers. The FX series amplifiers feature a built-in Wireless-Access-Point (WAP) for simple connection and configuration via WiFi as a well as an intuitive web-based software UI. 
  • The FX Series’ pedigree is the culmination of compact Class D design and Ashly’s years of developing easy-to-use software. Along with a newly incorporated DSP engine & software UI, the FX series takes amplification to new levels.
  • Each FX model offers a healthy compliment of IO (include Digital SPDIF In & Out) and programmable integration ports for remote Volume Control, GP triggers and more.
  • FX is networkable via Ethernet for wired LAN connection, or via its built-in WiFi hotspot. FX allows system configurations that don’t require additional equipment, such as stand-alone DSP or speaker system processors. All of that is in one box. 

High-Density DSP Power Amplifiers

To control FX’s powerful DSP, you’ll find easy access to its intuitive and user-friendly interface via a simple web browser (similar to AquaControl). No software to install (it’s built into the FX unit). Just connect using the Ethernet port or built-in WiFi and you’re ready to Rock & Roll. The WiFi connection allows secure ID and password protection from unauthorized use and for more advanced users, Ethernet allows custom IP settings for use on a more complex wired LAN.

Intelligent DSP

The FX Series features a powerful DSP engine that can configure to suit virtually any task, without the need for additional equipment. From processing input sources, routing and output DSP that can fine tune the sound of any speaker. Everything you need is right there. These will mix into Zones A-D and then into Outputs (2 or 4 depending on the number of amplifier channels). All models have a 4-channel DSP configuration with Input processing, Zone Processing, Output Processing, Speaker Processing and Device Settings.

UPC: 801128003511

Reviews: Ashly FX-60.4 1/2U DSP Amplifier 4 x 60W

There are currently no product reviews.

Warranty: Ashly FX-60.4 1/2U DSP Amplifier 4 x 60W Warranty:

30 Days

Manufacturer's Warranty:

5 Year Warranty

Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered