E-Image Aluminum Tripod System w/ Dolly for PTZ Cameras

About: E-Image Aluminum Tripod System w/ Dolly for PTZ Cameras

The E-Image GA752-PTZ Tripod System is the perfect solution for mounting your PTZ camera on a stable and portable tripod platform that eliminates wobbling or vibration. The bundle includes a two-stage aluminum tripod that can support up to 66 lbs, a 75mm Flat Base, a PTZ camera quick-release-plate, & a dolly with wheels. This package makes for an ideal solution for your PTZ camera.

The lightweight and durable aluminum tripod legs make it easy to set up on-location and quickly pack up after an event or use it as a permanent camera position in a studio.

• Convenient Tripod & Dolly Kit for PTZ Camera Setups
• Height Range (w/ Dolly): 67.1″ – 30.9″
• Max Payload: 66 lb.
• Plate Mountable from Rear or Front
• Plate Includes Safety Locks and Safety Release
• Plate Includes 1/4″-20 and 3/8″-16 Mounting Threads
• 2-Stage/3-Section
• Dolly w/ Locking Wheels

IDEAL PTZ SOLUTION

While the tripod legs are still absolutely essential for stability, using a PTZ camera eliminates the need for a tripod head. The GA230S-PTZ replaces the fluid head with a P6 Quick-Release plate, creating a more straightforward solution. The P6 plate includes a spring-loaded thumb screw that will allow you to fasten the tripod plate without ever touching the camera. This works by pulling the thumb screw outwards away from the camera and readjusting the angle of the screw to continue tightening.

75MM TRIPOD

The GA752S’s unique features include the E-Image 3-Section Aluminum Legs and a payload capacity up to 88 pounds. It is made of lightweight aluminum, has a 75mm bowl, and features a twin-tube leg design. The tripod can be adjusted to a maximum height of 62” and a minimum height of 25” with a folded length of 29”. An adjustable mid-level spreader provides extra security and stability.

MOUNTING POINTS

The P6 quick-release plate itself also includes two mounting threads; a 1/4″-20 thread & a 3/8″-16 thread. These would be ideal for mounting lighter accessories like a shotgun mic, LED light, monitor, wireless transmitter, tally light, or any other accessories you might need.

HEAVY-DUTY DOLLY

The dolly supports up to 88.2 lbs and is ideal for moving tripods along a flat surface for quick repositioning between shots. The adjustable rubber foot mounts provide a quick and easy setup. This dolly is perfect for both studio and on-location use and offers a much more safe & convenient transport.

Specifications

• Tripod
  • Payload Range 66 lbs / 30kg
  • Maximum Height 61.4″
  • Minimum Height 25.2″
  • Collapsed Height 29.1″
  • Bowl Size 75mm ball
  • Stages 2
  • Sections 3
  • Spreader Type Mid-Level
• 75mm Flat Base
  • Diameter 4.3" / 110mm
  • Net Weight 0.5 lbs. / 215g
  • Quick Release Plate
  • Dimensions 4.7" x 3.9 x 1""
  • Net Weight .7 lbs
• Pedestal
  • Net Weight 7.7 lbs./3.5 kg
  • Footprint Diameter 39.4 in./100 cm
  • Height 5.7 in./14.5 cm
  • Radius 19.7 in./50 cm
  • Wheel Width 2.95 in./75 mm
  • Lockable Wheels Yes
  • Build Material Legs: Aluminum | Wheels: Rubber | Screws: Steel
  • Payload 88.2 lbs./40 kg.

What's Included

• 1 x GA752S Aluminum Tripod Legs
• 1 x 75BF 75mm Flat Base
• 1 x GS01 Mid-Level-Spreader
• 1 x P6 Mounting Plate
• 3 x F3 Rubber Feet
• 1 x EI-7003 Dolly