Electro-Voice ETX-10P 10in Powered Speaker
Model: EV ETX-10P-US
About: Electro-Voice ETX-10P 10in Powered Speaker
Built from the ground up for the true audio professional. Whether you are doing rental and staging, DJ, mobile production or just need a wicked pair of speakers the ETX series is for you! The ETX 10 was designed by the team at EV and features a 10" horn and a 1.25" compression driver (titanium) inside its fully wooden birch enclosure.
EV’s FIR-Drive utilizes the latest Finite Impulse Response (FIR) filter technology to optimize transducer linearity. Advanced limiter algorithms for independent peak and thermal transducer protection.
Designed, engineered and tested for ultimate reliability by Electro-Voice in the USA.
EVs brand new DSP is host to many great features including:
- Boundary compensation filters (use as wedge, flown or pole mounted)
- Delay to several hundred feet
- Three-band parametric EQ
- Polarity invert
- Multiple high-pass crossover points
- Lockout mode to prevent tampering
ETX10P Features
- 10-inch LF SMX woofer
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 134 dB peak SPL
ETX10P Specifications
Frequency Range | 65 Hz – 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass. |
Maximum SPL | 134 peak dB Maximum SPL is measured at 1 m using broadband pink noise at maximum output. |
Power Consumption | 100 – 240 V~, 50 – 60 Hz, 1.6 – 0.8 A Current rating is 1/8 power. |
Power Rating | 2000 W |
Frequency Response | 85 Hz – 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass. |
Coverage (Nominal -6 dB) H | 90 ° |
Coverage (Nominal -6 dB) V | 60 ° |
LF Transducer | SMX2100 254 mm (10 in) |
HF Transducer | DH3-B 1.25-in titanium compression driver |
Crossover Frequency | 1700 Hz |
Connector Type | (2) XLR/TRS combo jack and (1) XLR link output |
Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat |
Grill | 16AWG steel with powdercoat |
Suspension | (8) M10 suspension points |
Height | 526 mm (20.71") |
Width | 330 mm (12.99") |
Depth | 365 mm (14.37") |
Weight Net | 20.3 kg (44.75 lbs) |
Shipping Weight | 22.9 kg (50.49 lbs) |
UPC: 800549769297
Reviews: Electro-Voice ETX-10P 10in Powered Speaker
Warranty: Electro-Voice ETX-10P 10in Powered Speaker
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
DYNACORD
- Electronics 3 years
- Non-Powered Speakers 5 years
- Powered Speakers 3 years
- Speaker Accessories & Hardware 1 year
ELECTRO-VOICE
- Amplifiers/Signal Processing 3 years
- Non-Powered Speakers 5 years
- Powered Speakers 3 years
- Speaker Accessories & Hardware 1 year
- Wired Microphones 3 years
- Wireless Microphones (RE2 and RE300) 2 years
- Wireless Mic & Powered Accessories 3 years
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered