Electro-Voice ETX-12P 12in Powered Speaker
Model: EV ETX-12P-US
About: Electro-Voice ETX-12P 12in Powered Speaker
Built from the ground up for the true audio professional. Whether you are doing rental and staging, DJ, mobile production or just need a wicked pair of speakers the ETX series is for you! The ETX-12P was designed by the team at EV and features a 12" horn and a 1.25" compression driver (titanium) inside its fully wooden birch enclosure.
EV’s FIR-Drive utilizes the latest Finite Impulse Response (FIR) filter technology to optimize transducer linearity. Advanced limiter algorithms for independent peak and thermal transducer protection.
Designed, engineered and tested for ultimate reliability by Electro-Voice in the USA.
EVs brand new DSP is host to many great features including:
- Boundary compensation filters (use as wedge, flown or pole mounted)
- Delay to several hundred feet
- Three-band parametric EQ
- Polarity invert
- Multiple high-pass crossover points
- Lockout mode to prevent tampering
ETX12P Features
- 12-inch LF SMX woofer
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 135 dB peak SPL
ETX12P Specifications
| Frequency Range | 43 Hz – 20 kHz |
| Maximum SPL | 135 peak dB |
| Power Consumption | 100 – 240 V~, 50 – 60 Hz, 1.6 – 0.8 A |
| Power Rating | 2000 W |
| Frequency Response | 55 Hz – 20 kHz |
| Coverage (Nominal -6 dB) H | 90 ° |
| Coverage (Nominal -6 dB) V | 60 ° |
| LF Transducer | SMX2120 300 mm (12 in) |
| HF Transducer | DH3-B 1.25-in titanium compression driver |
| Crossover Frequency | 1600 Hz |
| Connector Type | (2) XLR/TRS combo jack and (1) XLR link output |
| Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat |
| Grill | 16AWG steel with powdercoat |
| Suspension | (8) M10 suspension points |
| Height | 613 mm (24.13") |
| Width | 381 mm (15") |
| Depth | 400 mm (15.75") |
| Weight Net | 23.6 kg (52.03 lbs) |
| Shipping Weight | 26.8 kg (59.08 lbs) |
UPC: 800549769303
Reviews: Electro-Voice ETX-12P 12in Powered Speaker
Jacob T. - 01/17/2019
Pros:
Excellent Sound
Loud
Good Bass for a 12in Woofer
Not too heavy
Good size
Excellent build quality
Built in DSP
Loud
Good Bass for a 12in Woofer
Not too heavy
Good size
Excellent build quality
Built in DSP
Cons:
Weight is 52 pounds
Combo XLR 1/4 inch are the only inputs. It would be nice to have RCA (This is more nit picky than anything else)
Combo XLR 1/4 inch are the only inputs. It would be nice to have RCA (This is more nit picky than anything else)
Comments:
I purchased these speakers after doing a lot of research. I used them on a few gigs and they sound amazing, provide a full and clear sound in any size room. They sound amazing, they get exceptionally loud but stay super clear (assuming you are sending them a clean signal). The built in DSP provides a lot of power. You can add a delay, edit the EQ of the speaker, and use the built in location profiles. I would recommend these speakers in a heartbeat to anyone looking for a high quality speaker.
I use these speakers as a Pro DJ. I provide service with these speakers for weddings, corporate events and school gigs.
I use these speakers as a Pro DJ. I provide service with these speakers for weddings, corporate events and school gigs.
Bottom Line:
Yes, I would recommend this to a friend
Warranty: Electro-Voice ETX-12P 12in Powered Speaker
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
DYNACORD
- Electronics 3 years
- Non-Powered Speakers 5 years
- Powered Speakers 3 years
- Speaker Accessories & Hardware 1 year
ELECTRO-VOICE
- Amplifiers/Signal Processing 3 years
- Non-Powered Speakers 5 years
- Powered Speakers 3 years
- Speaker Accessories & Hardware 1 year
- Wired Microphones 3 years
- Wireless Microphones (RE2 and RE300) 2 years
- Wireless Mic & Powered Accessories 3 years
