SPL Audio BiG

About: SPL Audio BiG

The Stereo Image Bigger Maker for series 500.

500 series double-slot module for stereo stage processing.

BiG is special. BiG is unique. - BiG enlarges the stereo image in a new manner and opens up new creative ways of sound shaping. Intuitive with just three controls.

On/Bypass - The On/Bypass switch activates (On) or deactivates (Bypass) the module. This allows you to quickly switch between processed and unprocessed signal.

Signal LEDs - The signal LEDs (Sig) indicate whether an audio signal is present at the input of the respective channel. (With a level higher than -20 dBu)

Range - With the Range control, the frequency Range which should be processed can be selected.

Stage - With the Stage control, the frequency range previously selected with the Range control can be moved backwards or forwards on the stereo stage.

BIGNESS - The huge BIGNESS control adjusts the intensity of the STEREO IMAGE SHAPING.

BASS - The BASS/Off switch can be used to activate (BASS) or deactivate (Off) an additional bass boost following the BIGNESS section. The bass boost is performed by a passive filter implemented in a similar circuit to the one used in the AirBass function of the SPL IRON Mastering Compressor.

Sounds good - With all SPL devices we develop not only according to plan, but also by ear. All important components are installed on the circuit boards using Through-hole technology. This way we can ensure that we can use the best sounding components.

Specifications

• General
  • Frequency range (-3 dB): 10 Hz - 100 kHz
  • Common mode rejection (1 kHz, 0 dBu ): > -82 dBu
  • THD + N (0 dBu): 0.03%
  • Noise (A-weighted): 92.3 dBu
  • Dynamic range: 113 dB
• Input (balanced)
  • Impedance: 20 kohms
  • Maximum input gain: +21 dBu
• Output (balanced)
  • Impedance: 150 ohms
  • Maximum output gain: +21 dBu