sE Electronics sE4100 Large-Diaphragm Condenser Microphone (Matched Pair)

About: sE Electronics sE4100 Large-Diaphragm Condenser Microphone (Matched Pair)

Classic sound meets modern craftsmanship in its simplest form; we proudly introduce the sE4100 large-diaphragm cardioid true-condenser microphone, the latest addition to our renowned range of large-diaphragm true-condenser microphones. This cardioid-only version of the multipattern sE4400 comes with the same sleek design and warm, smooth sound, making it an ideal choice for a wide variety of applications such as drum overheads and guitar amps.

• The little brother to the renowned sE4400
• The very same hand-crafted twin 1“ gold-sputtered brass capsule as the sE4400
• True condenser cardioid capsule
• Individually tuned in our own factory
• Built roadworthy with all-metal housing
• Innovative close-miking shockmount
• 80 / 160 Hz low-cut filters and -10 / -20 dB pads
• Available in a matched-pair configuration

Featuring the very same handcrafted twin 1“ gold-sputtered brass capsule as the sE4400 – the sE4100 is a true workhorse that delivers incredible results on a wide array of sources. From vocals to grand pianos and acoustic or brass instruments to electric guitar cabs and drum overheads – the sE4100 is outstanding in live environments as a factory matched-pair for overheads or instrument spot mic applications.

Handcrafted with the highest attention to detail, the sE4100 is built with a dent-proof die-cast all-metal housing, metal switches, a rugged spring steel wire mesh grille, and a premium finish. The sE4100 is roadworthy, ready to handle the day-to-day life of touring professionals and years of demanding studio use.

With integrated attenuation pads and low-cut filters, the sE4100 compensates for loud sources, easily taming excessive low-frequency rumble or proximity effect, providing the necessary extended dynamic range and roll-offs needed to dial in your sound at its source.

Precise cardioid polar pattern with impressive off-axis rejection

• Minimizes signal bleed from unwanted sources
• Ensures high gain-before-feedback in the entire frequency range
• Provides directivity from the source by preventing coloration from indirect reflections and reverb

Pure and simple. No frills. Just great sound.

Classic sound meets modern craftsmanship in its simplest form; the sE4100 is a cardioid version of the renowned sE4400. With cardioid being the most common polar pattern utilized in both live and studio applications, the sE4100 prioritizes the features you really need, putting the smooth sound character of classic condensers in the palm of your hand.

• Pure and simple - features the very same handcrafted capsule as used on the sE4400.
• No frills - just the features you really need. Cardioid only. no LEDs. no plastic switches.
• Just great sound - The one mic that does it all.

Handcrafted 1" true-condenser capsule

Featuring the very same handcrafted twin 1“ gold-sputtered brass capsule as the sE4400 – the sE4100 is a true workhorse that delivers incredible results on a wide array of sources. From vocals to grand pianos and acoustic or brass instruments to electric guitar cabs and drum overheads – the sE4100 is outstanding in live environments as a factory matched-pair for overheads and instrument spot mic applications.

• Gold-sputtered diaphragms ensure maximum reliability
• Every capsule is handcrafted and individually tuned in our very own factory
• True-condenser technology and ultra-precision parts for the best possible sound quality

Dent-proof metal housing with premium finish 

Hand-crafted with the highest attention to detail, built with a dent-proof die-cast all-metal housing, metal switches, a rugged spring steel wire mesh grille, and a premium finish. The sE4100 is roadworthy, ready to handle the day-to-day life of touring and years of demanding studio use.

• Roadworthy die-cast housing and solid spring-steel grille for maximum robustness
• Efficient rejection of any electrical interference and noise
• Premium finish ensures a great look for many years

Switchable pre-attenuation pad & low-cut filter

With its integrated attenuation pad and low-cut filter, the sE4100 compensates for loud sources, easily taming excessive low-frequency rumble or proximity effect, providing the necessary extended dynamic range and roll-offs needed to dial in your sound at its source.

• Switchable pre-attenuation pad
  • Provides an extended dynamic range
  • Enables a wide range of applications
  • iIeal for close-miking of loud sources such as electric guitars, brass instruments and kick drums
• Switchable low-cut filter
  • Eliminates low-frequency rumble or footfall noise
  • Compensates for excessive bass with close-mic techniques

​Available in matched-pair configurations

Each sE4100 matched-pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shock-mounts and two sE4100 microphones.

• Rigorously tested, tuned in-house and sonically matched for a virtually identical frequency response
• Provides balanced, consistent stereo sound and imaging
• Complete with the essentials needed for instant stereo applications

Specifications

• Capsule - Hand-crafted 1“ true condenser capsule
• Polar patterns - Cardioid, Hypercardioid, Omni-directional, Figure-8 
• Frequency range - 20 – 20,000 Hz
• Sensitivity - 25 mV/Pa (-32 dBV)
• Max. SPL (0.5% THD) (0/10/20 dB Attenuation pad) - 137 / 147 / 157 dBSPL
• Equivalent noise level - 13 dB(A)
• Dynamic range (0/10/20 dB Attenuation pad) - 124 / 134 / 144 dB
• Signal-to-noise ratio - 81 dB
• Low cut filter - 40 / 80 Hz, 6 dB/Oct, switchable
• Attenuation pad - 10 / 20 dB, switchable
• Powering - 48 Volts according to IEC 61938
• Electrical Impedance - 22 Ohms
• Recommended load impedance - >1k Ohms
• Current consumption - 3.7 mA
• Connectivity - 3-pin male XLR connector
• Weights & Dimensions
  • Microphone (each)
    • (LxWxH) 2.32 x 1.10 x 5.75 in. / 58 x 29 x 146 mm
    • 290 g / 10.23 oz.
  • Shockmount (each)
    • (LxWxH) 4.21 x 2.95 x 4.65 in. / 107 x 75 x 118 mm
    • 220g / 7.76 oz.
  • Stereo Bar
    • 11.81 x 0.98 x 0.75 in. / 300 x 25 x 19 mm
    • 267 g / 9.42 oz.
  • Flight Case
    • (LxWxH) 13.31 x 10.83 x 5.75 in. / 338 x 275 x 146 mm
    • 4.09 lbs / 1.86 kg.
  • Total net weight
    • 6.93 lbs / 3.14 kg.

What’s in the box

• Microphone (x2)
• Shockmount with thread adapter (x2)
• Stereo mounting bar
• Metal case
• sE logo sticker
• User manual with warranty card