Electro-Voice RE97TX Omindirectional Low Profile Headworn Microphone - Beige

About: Electro-Voice RE97TX Omindirectional Low Profile Headworn Microphone - Beige

The Electro-Voice RE97Tx is an Ultra-low profile, omnidirectional, back-electret condensor headworn microphone designed for use with standard EV and Telex belt packs. The RE97Tx is intended for spoken word use such as Houses of Worship, Corporate AV, Theatre, Fixed Install, and other venues where a full- range, natural, well-balanced sound is required. The omnidirectional polar pattern of the RE97Tx provides a clean and accurate sonic quality and uniform output regardless of the microphone’s position relative to the sound source.

The RE97Tx is designed to be extremely flexible and easily formed to fit over the ear of any user. The mal- leable boom and earhook can be shaped to match virtually any contour. The TA4F terminated cable is dis- cretely routed behind the user and attaches to the shirt collar with the elegant clothing clip included, keeping the cable out of the way and preventing the micro- phone from being pulled off the user’s ear. The sup- plied windscreen can be used in windy environments and to reduce breath noise.

The RE97Tx comes with a shielded 4ft cable terminat- ed in a high quality TA4F connector. It is wired for use with standard EV and Telex belt packs including the EV (BPU-2/CSB-1000) and Telex (WT-500/WT-1000) body- pack transmitters and operates from a 5VDC supply.

• Ultra-Low Profile for Inconspicuous Use
• Lightweight, Durable
• Interchangable for Left or Right Ear
• Omnidirectional Polar Pattern to Provide Clean Sound and Uniform Response

Specifications

• Generating Element - Condenser, Back-Electret
• Frequency Response - 50 Hz - 15 kHz
• Polar Pattern - Omnidirectional
• Sensitivity, 1 kHz (Open Circuit) - 4.0 mV/Pascal
• Clipping Level - >125 dB SPL
• Equivalent Noise - 32 dBA
• Dynamic Range - 93 dB
• Output Impedance, 1 kHz - 3000 Ohms
• Power Requirements - +5 VDC
• Current Consumption - 310 μA
• Polarity - Positive Pressure on Diaphragm Produces a Positive Voltage on Pin 2
• Connector Wiring
  • Pin 1 - Ground, Shield
  • Pin 2 - Audio
  • Pin 3 - Bias Voltage
  • Pin 4 - N/C
• Cable - 4 ft (1.22m) Long, 0.077 in (1.95mm) Diameter
• Accessories Furnished - Windscreen, Clothing Clip, Gig Bag
• Colors Available - Beige, Brown, Black
• Dimensions
  • Boom Length (as shipped): 3.4 in. (86.4mm)
  • Boom Diameter: 0.080 in. (2.00mm)
  • Capsule Diameter: 0.120 in. (3.05mm)
  • Earhook Diameter: 0.090 in. (2.30mm)
• Net Weight - 0.6 oz. (17g)
  • Mic Only - 0.2 oz. (5.7g)