Beyerdynamic DT 280 MKII Single-Ear Headset w/ Dynamic Mic (200/80 Ohm)

About: Beyerdynamic DT 280 MKII Single-Ear Headset w/ Dynamic Mic (200/80 Ohm)

The DT 280 lightweight, compact headset is ideal for use in radio, television, reports, cameras, sound and light mixing consoles and intercom systems. The headset features a powerful neodymium magnet system, very high reproduction precision and a balanced, spacious sound image. With the flexible gooseneck, the dynamic microphone can be adjusted to an optimal response angle.

This headset is also available as a dual-ear version (DT 290 MK II).

• High-quality dynamic microphone with hypercardioid characteristic (very high feedback prevention)
• High-performance neodymium magnet system for excellent playback precision
• More flexible, swivelling gooseneck for optimum positioning
• Made in Germany

HIGH WEARING COMFORT

The velvety soft, circumaural ear shell and the padded, adjustable headband offer a high degree of wearing comfort.

HIGH FEEDBACK IMMUNITY

The hypercardioid polar pattern ensures extremely high feedback immunity and noise cancellation. The microphone holder can be rotated so that the microphone can be worn either on the left or right side.

MADE IN GERMANY

The Broadcast headphones and headsets are and always have been handcrafted in Germany. The materials and component parts used are painstakingly made by hand and can be replaced if necessary.

Specifications

• Headphone
  • Transducer principle - Dynamic
  • Operating principle - Closed
  • Transmission range - 10 - 30,000 Hz
  • Nominal impedance - 80 Ω / system
  • Nominal SPL at 1 kHz - 100 dB SPL at 1 mW = 0.28 V to 80 Ω
  • T.H.D. - < 0.2%
  • Nominal power rating - 100 mW = 120 dB = 2.8 V to 80 Ω
  • Ambient noise insulation - approx. 16 dBA
  • Average pressure on ears - 4.5 N
  • Weight without cable - 170 g
  Microphone
  • Transducer principle - Dynamic
  • Frequency response - 40 - 12,000 Hz
  • Polar pattern - Hypercardioid
  • Output voltage (at a distance of 5 cm) - approx. 1.3 mV/Pa
  • Nominal impedance - 200 Ω
  • Nominal output impedance - > 1000 Ω
  • Outer diameter - approx. 23.2 mm

NOTE: All versions of the DT 280 are supplied without a connection cable. Please order the desired connection cable at the same time.