Neutrik NC5FXX 5 Pin XLR Female Connector w/ Nickel Housing & Silver Contacts

About: Neutrik NC5FXX 5 Pin XLR Female Connector w/ Nickel Housing & Silver Contacts

The NC5FXX is a 5 pole female cable connector with Nickel housing and silver contacts.

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble, and improves contact integrity as well as cable strain relief.

Features

• Unique cage design of female contact for low contact resistance and high integrity
• Female contact incorporates a solder barrier to prevent solder running into the contact mating area
• Female connector with improved solid metal latch which is larger and easier to handle
• Additional ground spring contacts for better shell ground continuity
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
• Boot with polyurethane gland gives high protection to cable bending stresses
• Colored rings and boots available for coding or identification
• Sleek and ergonomic design - valuable and handy
• Rugged zinc diecast shell, longlasting and dependable
• Internal thread on shell is well protected against any damage

Specifications

• Electrical
  • Capacitance between contacts -  ≤ 7 pF
  • Contact resistance -  ≤ 3 mΩ
  • Dielectric strength -  1,5 kVdc
  • Insulation resistance -  > 10 GΩ (initial)
  • Rated current per contact -  7,5 A
  • Rated voltage -  < 50 V
• Mechanical
  • Cable O.D. -  3.5 - 8.0 mm
  • Insertion force -  ≤ 20 N
  • Withdrawal force -  ≤ 20 N
  • Lifetime -  > 1000 mating cycles
  • Wiresize -  max. 1.0 mm²
  • Wiresize -  max. 18 AWG
  • Wiring -  Solder contacts
  • Locking device -  Latch lock
• Material
  • Boot -  Polyurethan
  • Contact plating -  2 µm Ag over 2 µm Ni
  • Contacts -  Brass (CuZn39Pb3)
  • Insert -  Polyamide (PA66)
  • Locking element -  Zinc diecast (ZnAl4Cu1) / Ck 67 (spring)
  • Shell -  Zinc diecast (ZnAl4Cu1)
  • Shell plating -  Nickel
  • Strain relief -  Polyacetal (POM)
• Environmental
  • Flammability -  UL 94 V-0
  • Standard compliance -  IEC 61076-2-103
  • Protection class -  IP 40
  • Solderability -  Complies with IEC 68-2-20
  • Temperature range -  -30 °C to +80 °C