Sescom 4-Pin XLR Power & DMX Control Scroller Cable - 250ft

About: Sescom 4-Pin XLR Power & DMX Control Scroller Cable - 250ft

The Sescom SCROLL-4XMF 4-pin XLR scroller cable is ideal for a variety of lighting fixtures with separate power supplies. Great for LED fixtures, remote LED lights, color scrolling lights, and gobo rotator lights.

This 4-pin scroller cable sends both power and DMX control to a color changer providing a remote means of switching gels. These cables are also used for a "daisy chain" connection where power & control can feed in and out of a number of gelstrings allowing your DMX system to control multiple units from a single source. Cables are hand crafted in the Sescom shop with Belden 1502R cable, which employs a two conductor 22AWG data feed and a two conductor 18 AWG power feed, terminated to Neutrik NC4MXX 4-pin male and NC4FXX 4-pin female connectors. These cables can be used in conjunction with fixtures such as the Apollo MXR 2, Chroma-Q Cascade, Morpheus ColorFader and the Wybron CXI or any other power and lighting converter that utilizes a 4-pin XLR connection.

• Color Scroller Cable for Theaters & Stages
• Sends Power & DMX Control in One Cable
• Daisy Chain Cable for Multiple Scrollers
• Belden 1502R Control Cable
• 4-Pin Neutrik Black & Silver XLR Connectors

Specifications

• Belden 1502R Media Control, 1 Pair 22 AWG TC, 2 Conductor 18 AWG, Riser
  • Max. Pull Tension: 65.3 lbs (28.6 kg)
  • Min Bend Radius: 2.5 in (64 mm)
  • Pair Material: TC - Tinned Copper
  • Conductor Material: Tinned Copper
  • Pair Insulation Material: PE - Polyethylene (Foam)
  • Conductor Insulation Material: PVC - Polyvinyl Chloride
  • Inner Shield Material: Bi-Laminate (Alum+Poly) & Tinned Copper (TC)
  • Outer Jacket Material: PVC - Polyvinyl Chloride
  • Overall Cable Diameter: 0.25 in (6.4 mm)
  • Plenum Number: 1502P
  • UL Voltage Rating: 300 V
  • UL Temperature: 75° (Operating -20° to +75°)
• 4-Pin Neutrik Black & Silver XLR Connectors
  • Capacitance between Contacts: ≤ 7 pF
  • Contact Resistance: ≤ 3 mΩ
  • Dielectric Strength: 1.5 kVdc
  • Insulation Resistance: > 10 GΩ (initial)
  • Rated Current Per Contact: 10 A
  • Rated Voltage: < 50 V
  • Insertion Force: ≤ 20 N
  • Withdrawal Force: ≤ 20 N
  • Lifetime: > 1000 mating cycles
  • Locking Device: Latch lock
  • Boot: Polyurethan
  • Contacts: Brass (CuZn39Pb3)
  • Insert: Polyamide (PA66)
  • Locking Element: Zinc diecast (ZnAl4Cu1)
  • Shell: Zinc diecast (ZnAl4Cu1)
  • Shell coating: Black KTL
  • Flammability: UL 94 V-0
  • Standard Compliance: IEC 61076-2-103
  • Protection Class: IP 40
  • Temperature Range: -30°C to +80°C