The Light Source
-
The Light Source Mega-Clamp C-Clamp - Black w/ Zinc Bolt
The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum; so it’s both... -
The Light Source Mega-Clamp C-Clamp - White Powder Coat
The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum; so it’s both... -
The Light Source Mega-Coupler with Baby Pin - Black
Our standard Mega-Coupler with a 5/8" Baby Pin attached. Baby Pin is 3" in length with 1/2" threads. Minimum Size 1.25" Pipe. 1.66" OD Pipe Maximum Size... -
The Light Source Mega 90 Degree Fixed Coupler - Silver
The Mega-Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Mega-Coupler has the wide wing nuts for fastening the clamp to the pipe or... -
The Light Source Mega-Coupler, Swivel - Silver
The Swivel Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Swivel-Coupler has wide wing nuts for fastening the clamp to the pipe or... -
The Light Source Mega-Coupler, Swivel - Silver w/ Steel Wingnut
The Swivel Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Swivel-Coupler has wide wing nuts for fastening the clamp to the pipe or... -
The Light Source Versi-Clamp - Silver
The Versi-Clamp wraps around the entire range of standard truss, from 2" OD down to 1" OD, all without marring the truss. The unique 2 position latch on the link saves... -
The Light Source Mega-Coupler w/ 1/2 Inch Flat Head Bolt - Black
This Mega-Coupler replaces the standard Hex Head bolt with a flat head countersunk bolt. Available with a 1/2" flat head base or a 3/8" flat head base to fit a flat head... -
The Light Source Mega-Coupler, Swivel - Black w/ Steel Wingnut
The Swivel Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Swivel-Coupler has wide wing nuts for fastening the clamp to the pipe or... -
The Light Source Mega-Coupler with Baby Pin - Silver
Our standard Mega-Coupler with a 5/8" Baby Pin attached. Baby Pin is 3" in length with 1/2" threads. Minimum Size 1.25" Pipe. 1.66" OD Pipe Maximum Size... -
The Light Source Mega Slim Coupler 3/8″ × 1″ Hex Cap Screw - Silver
The Mega Slim Coupler is a lower profile option for smaller light fixtures. It is half the size of our standard Mega-Coupler and weighs 30% less; yet fits the same as the... -
The Light Source Mini-Clamp - Black Anodized (Short Handle)
The Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to... -
The Light Source Micro-Clamp- Black
The Micro Clamp is ideal for hanging miniature fixtures like MR-16’s onto a small pipe or tube. Made from high tensile aircraft aluminum. Solid design grips pipe with micro... -
The Light Source Mini-Clamp - White Powder Coat
The Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to... -
The Light Source Mega-Coupler w/ 1/2 Inch Flat Head Bolt - Silver
This Mega-Coupler replaces the standard Hex Head bolt with a flat head countersunk bolt. Available with a 1/2" flat head base or a 3/8" flat head base to fit a flat head... -
The Light Source Mega-Coupler - Silver w/ Steel Wingnut
The Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with The Light Source Wing Nut. Our Mega-Coupler has solid nut tabs that won’t break off. It uses... -
The Light Source Barco Projector Clamp - Silver
The TC-Barco Projector Clamp will fasten from 2" OD to 1.5" OD Tube. Has a 2-1/2" T-Handle so no tools are required to fasten to the pipe. Over 2" of... -
The Light Source Safety-Clamp - Black
Perfect for high catwalks and educational facilities with less experienced crews. Snaps onto the pipe with a carabineer style latch and cannot fall off. (except off the end of the... -
The Light Source Mega-Swivel - Black
Pan locking bolt style theatrical C-Clamp. Fixture is bolted to, and rotates on retained steel post in clamp body. Comes with half inch fasteners. Minimum Size 1" pipe,... -
The Light Source Slim Claw - Black
The Slim-Claw will fasten to both 1-1/2 Schedule 40 pipe (1.90 OD) and 2 OD truss tube. The Claw has a 3-1/2 T-handle so no tools are required to fasten to the pipe. Comes with 1... -
The Light Source Coupler w/Eye Nut - Silver
he Mega-Coupler w/Eye Nut has a Forged Steel Eye Nut for making rigging connections from a pipe or truss. The Forged Eye Nut is secured to the Mega-Coupler with a 1/2"... -
The Light Source Slim Claw - Silver
The Slim-Claw will fasten to both 1-1/2 Schedule 40 pipe (1.90 OD) and 2 OD truss tube. The Claw has a 3-1/2 T-handle so no tools are required to fasten to the pipe. Comes with 1... -
The Light Source Purlin Clamp 3/8in Bolt - Black
The Purlin Clamp is perfect for installing almost anything to bar joists, purlins and I-beams up to 1" thick. The Purlin Clamp is available with 3/8"-16 tpi fasteners.... -
The Light Source Mega-Coupler w/ 3/8 Inch Flat Head Bolt - Silver
This Mega-Coupler replaces the standard Hex Head bolt with a flat head countersunk bolt. Available with a 1/2" flat head base or a 3/8" flat head base to fit a flat head...