The Light Source
AVShop.ca is an authorized The Light Source retailer.
-
Staff Choice
The Light Source Mega-Clamp C-Clamp - Black
The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum, so it’s both... -
The Light Source MP1.5B.5M Mega-Coupler Pipe Adapter
The Pipe to Coupler Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes... -
The Light Source MP1.5B.5B Mega-Coupler Pipe Adapter (Black)
The Pipe to Coupler Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes... -
The Light Source Mega-Combo Wrench (Blue)
Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. -
The Light Source Mega-Combo Wrench (Black)
Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. -
The Light Source Purlin Clamp 1/2in Bolt
The Purlin Clamp is perfect for installing almost anything to bar joists, purlins and I-beams up to 1" thick. A 1/2"-13 × 2.5″ fully threaded square head set... -
The Light Source Purlin Clamp 3/8in Bolt
The Purlin Clamp is perfect for installing almost anything to bar joists, purlins and I-beams up to 1" thick. The Purlin Clamp is available with 3/8"-16 tpi fasteners.... -
The Light Source Mega Slim Coupler with 3/8" Flat Head Bolt - Black
The Mega Slim Coupler is a lower profile option for smaller light fixtures. It is half the size of our standard Mega-Coupler and weighs 30% less; yet fits the same as the... -
The Light Source Mega-Airwall Hanger (7 Inch)
The Mega Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega Airwall Hanger engages the airwall track the... -
The Light Source 12 inch Mega Truss Pick, 1 ton
The Mega-Truss Pick is CNC machined from solid 1″ × 6″ 6061 T-6 aluminum billet. Two pockets cut into the Mega-Truss Pick have coupler style aluminum pivoting... -
The Light Source Mongo Wrench
The Mongo Wrench is a massive wrench, machined out of solid aircraft aluminum billet. The Mongo-Combo wrench will fasten everything a Mega-Combo Wrench can plus the Mega-Coupler... -
The Light Source TC Clamp - Black
The TC Clamp will fasten from 2" OD to 1.5" OD tube. The TC Clamp has a 2-1/2" T-handle so no tools are required to fasten to the pipe. 1.25″ ×... -
The Light Source Mega-Airwall Hanger (4 Inch)
The Mega Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega Airwall Hanger engages the airwall track the... -
The Light Source Mini-Clamp - Black Anodized
The Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to... -
The Light Source Mega-Coupler - Black
The Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with The Light Source Wing Nut. Our Mega-Coupler has solid nut tabs that won’t break off. It uses... -
The Light Source Uni-Bolt for Strut Channels
Uni-Bolt for fastening fixtures or pipes to strut Channel. Insert the Uni-Bolt into standard 1-5/8 inch by 1-5/8" strut channel, rotate 90 degrees and spin the 2"... -
The Light Source Mini-Clamp - Silver
The Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to... -
The Light Source Mega 90 Degree Fixed Coupler - Black
The Mega-Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Mega-Coupler has the wide wing nuts for fastening the clamp to the pipe or... -
The Light Source Mega-Coupler - Black w/ 3/8 Inch Hex Head Bolt
The Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with The Light Source Wing Nut. Our Mega-Coupler has solid nut tabs that won’t break off. It uses... -
The Light Source Coupler w/Eye Nut - Black
he Mega-Coupler w/Eye Nut has a Forged Steel Eye Nut for making rigging connections from a pipe or truss. The Forged Eye Nut is secured to the Mega-Coupler with a 1/2"... -
The Light Source Micro-Clamp- Black
The Micro Clamp is ideal for hanging miniature fixtures like MR-16’s onto a small pipe or tube. Made from high tensile aircraft aluminum. Solid design grips pipe with micro... -
The Light Source Mega-Coupler - Silver w/ 3/8 Inch Hex Head Bolt
The Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with The Light Source Wing Nut. Our Mega-Coupler has solid nut tabs that won’t break off. It uses... -
The Light Source Mega-Coupler with Baby Pin - Black
Our standard Mega-Coupler with a 5/8" Baby Pin attached. Baby Pin is 3" in length with 1/2" threads. Minimum Size 1.25" Pipe. 1.66" OD Pipe Maximum Size... -
The Light Source TC Clamp - Silver
The TC Clamp will fasten from 2" OD to 1.5" OD tube. The TC Clamp has a 2-1/2" T-handle so no tools are required to fasten to the pipe. 1.25″ ×...