Tentacle Sync
-
Tentacle Sync TRACK E Pocket Timecode Audio Recording w/ Lavaliere Mic
This product is not available to ship to USA The TRACK E Timecode Audio Recorder is nearly as small as the Timecode Sync Generator SYNC E, so it can easily fit in your pocket for... -
Tentacle Sync E MK2 Bluetooth Timecode Generator - Standard Set
The new Tentacle SYNC E mkII timecode generator is based on the well-known SYNC E. We have made it ready for the future with Bluetooth 5 and improved battery management. The... -
Tentacle Sync E MK2 Bluetooth Timecode Generator - Single Set
The new Tentacle SYNC E mkII timecode generator is based on the well-known SYNC E. We have made it ready for the future with Bluetooth 5 and improved battery management. The... -
Tentacle Sync Tentacle to XLR Timecode Cable
Standard XLR input connector for transmitting timecode from any Tentacle SYNC E and ORIGINAL timecode generator to devices that don’t have built-in timecode capabilities.... -
Tentacle Sync TRACK E Pocket Timecode Audio Recording (Basic Box, No Mic)
This product is not available to ship to USA The TRACK E – Basic Box is for those, who already have all the accessories and high quality microphones, but need more TRACK E... -
Tentacle Sync Tentacle to Straight BNC Timecode Cable
Bidirectional cable with straight BNC connector to connect a Tentacle Timecode Generator SYNC E or ORIGINAL to devices that accept and send timecode over BNC (eg: Panasonic... -
Tentacle Sync Tentacle to LEMO 5-Pin Timecode Cable
Cable to connect any Tentacle SYNC E and ORIGINAL timecode generator to a device that uses a standard LEMO 5-pin connector. This cable is suitable for Sound Devices Recorders,... -
Tentacle Sync Tentacle to RED 4-Pin Timecode Cable
Special cable to feed timecode from any Tentacle Sync timecode generator (SYNC E and ORIGINAL) to all RED cameras with 4-pin LEMO sync port. (Including: DSMC2 V-Lock I/O Expander,... -
Tentacle Sync Bracket Base Plate with Cold Shoe Mount for SYNC E
This lightweight aluminium bracket for the Tentacle SYNC E is exclusively manufactured by LanParte. It can be mounted to any camera rig or directly to a camera with the included... -
Tentacle Sync Tentacle to Right Angle BNC Timecode Cable
Bidirectional cable for transmitting timecode between any Tentacle Sync Timecode Generator SYNC E or ORIGINAL and a device that uses a BNC timecode in/out connector and vice... -
Tentacle Sync LEMO 5-Pin to Tentacle Timecode Cable
Cable to feed timecode from a device that uses a standard LEMO 5-pin connector to any Tentacle Sync Timecode Generator (SYNC E or ORIGINAL) and a TRACK E Timecode Audio Recorder.... -
Tentacle Sync Large One-Pocket-Pouch for Accessories
This Mesh Pouch with One Pocket from TentacleSync can be used to hold Tentacle timecode generator units, cables, or small accessories. The pouch features a... -
Tentacle Sync Velcro Loop Pads (25 Count)
25 pieces of additional velcro loop pads for any Tentacle Sync box. 25 x Velcro loop pads 4cm x 2,5cm -
Tentacle Sync Track E Silicone Bands Rainbow Set and Clamps
This SYNC E accessory set now features nine different coloured Silicone Bands for the SYNC E timecode generator. You can now find all the colours of the rainbow in this set... -
Tentacle Sync Tentacle to Micro-USB for Sony FX3 / FX30 Timecode Cable
Adapter cable to feed timecode from any Tentacle SYNC E & ORIGINAL timecode generator or TRACK E to a SONY FX3 and FX30 via the Multi/Micro USB Terminal. This is a low cost... -
Tentacle Sync Timecode and Bodypack Receiver to Camera Y-Cable
Custom-built split adapter cable to interfacing Tentacle SYNC E and ORIGINAL timecode generators with any camera using a mini jack input while also using a Sennheiser... -
Tentacle Sync Timecode and Microphone to Camera Y-Cable
Custom-built split adapter cable to connect any Tentacle SYNC E and ORIGINAL timecode generator to cameras with a 3.5mm microphone mini jack input while using an additional... -
Tentacle Sync Tentacle to LEMO 5-Pin Timecode Cable (Open Box)
Cable to connect any Tentacle SYNC E and ORIGINAL timecode generator to a device that uses a standard LEMO 5-pin connector. This cable is suitable for Sound Devices Recorders,... -
Tentacle Sync Lavalier Microphone
This general purpose broadcast-ready lavalier microphone features a lockable 3.5mm connector, a neat clip and windjammer all securely packed in an octopus print zipper bag.... -
Tentacle SYNC E Battery Replacement Kit
Battery Replacement Kit for the Tentacle SYNC E (mk1/mk2) Timecode Generator. Everything you need in order to replace your old built-in battery of the SYNC E by yourself.... -
Tentacle Sync Tentacle to DSLR Timecode Cable
Multi purpose 3.5mm mini jack (3-pin) cable. Use this cable to sync two Tentacle Sync devices with each other or connect your Tentacle SYNC E and ORIGINAL to any camera that uses... -
Tentacle Sync E Accessory Kit
Bundle of additional clamps, coloured rubber bands and velcro loop pads for Tentacle Sync E boxes. Features: 2 x Clamps for locking right-angle jacks 4 x Coloured rubber... -
Tentacle Sync Tentacle to RED 9-Pin Timecode Cable
Adapter cable to feed timecode from any Tentacle SYNC E or ORIGINAL to RED KOMODO and V-RAPTOR cameras via the 9-pin EXT connector. Features Direction: Mini jack to 9-pin LEMO... -
Tentacle Sync Tentacle to Alexa Mini Cable
Original 90° LEMO cable to connect a Tentacle SYNC E and ORIGINAL timecode generator to an ALEXA Mini camera. LEMO Anglissimo connector is pointing upwards...