Goo Systems Screen Goo 2.0 Reference White 1.0 - 16 Litre

About: Goo Systems Screen Goo 2.0 Reference White 1.0 - 16 Litre

Screen Goo Reference White 2.0 Coating is a complete coating system for the creation of 100% white premium quality projection surfaces. Performs best when applied to Screen Goo Premier Primer coated substrates.

• 100% 6500 degree Kelvin White
• 1.0 gain
• 20% greater coverage and easier to roll than Classic Goo
• Best suited for rooms with complete light control
• Use with projectors producing >12 ANSI Lumens per square foot of screen area

To create a Goo 2.0 Reference White 1.0 Goo Screen you will need to apply two Goo 2.0 Reference White 1.0 coats to a surface prepared with Screen Goo Premier Primer.

About Goo Systems

Goo Systems Canada is dedicated to helping you create the best projection screen solution.

Screen Goo is a line of premium quality water-based acrylic optical paint designed specifically to transform any smooth paintable surface into a high performance projection screen. An environmentally friendly and incredibly customizable option!

Screen Goo products are ideal for Home Theatre, Commercial, Educational or Industrial Front or Rear, 2D or 3D Projection applications!

Advantages

• ASTM D4236 approved non-toxic water base acrylic coating
• ASTM E-84-06 approved for fire safety
• Lead-free 
• Premium, colour fast pigments
• Museum grade 100 % acrylic base 
• Very durable
• Very matte 
• Very reflective
• Not degraded by UV light
• Strongly resistant to yellowing
• Spray or roller application
• Suitable for indoor and outdoor use

Application Notes - Two coat application required

• General: Substrate should be free of grease, oil, dirt, fingerprints and other contaminants.
• Drywall: Minimum level 4 finish recommended. Prime with Screen Goo Premier Primer.
• Wood Products: Prime with quality white primer compatible with water-based over-coating.
• Fabrics: Will adhere correctly and permanently to all natural fibre materials: canvas, muslin, etc. Some compatibility with PVC, polyester and other synthetic substrates. Testing suggested for synthetics applications.
• Rolled: Use maximum 1/4” nap, lint-free rollers; foam rollers are not recommended.
• Sprayed: Use an HVLP system. For application <50 sq. ft; 1.5-2mm tip diameter. 40-45 psi. 
  • For applications > 50sq. ft, use air-assisted airless system: 12 -14 fan spray tip; piston pump; maximum 50 ft. of hose; ¾ gpm capacity. 
    • Still air required for best results, minimize air circulation.

Specifications

• Coverage – Rolled Application: 960 sq. feet or 89.2 sq. meters
  • Sprayed Applications reduce coverage by 20%.
• Gloss: 5.3
• Volume Solids: 36.5-38.5 
• Viscosity: 27 seconds # 3 Zahn cup
• Recommended film thickness:
  • Mils Wet: 1.5
  • Mils Dry: 0.50
• Spreading Rate (no application loss): 450 sq ft/gal @ (recommended Mils Dry Film Thickness)
• Drying (25° C/77°F; 45% RH):
  • To Touch: 1 hour
  • To Handle: 24 hrs.
  • To Sand: Do not sand
  • To Recoat: 1 hour
  • Force Dry: not recommended
    • Curing temperature should not exceed 40°C/104°F
• Mixing Ratio: N/A
• Pot Life: N/A
• Flash Point: will not ignite; may boil at > 100°C/212°F
• Package Life: 5 years unopened