Meyer Sound USW-112XP Compact Narrow Subwoofer

About: Meyer Sound USW-112XP Compact Narrow Subwoofer

The USW-112XP compact narrow subwoofer further extends the USW family.With its great power-to-size ratio,it provides big bass sound for very tight spaces. Its compact rectangular enclosure and slanted connector panel enable flush-mounting of the cabinet against wall surfaces, reducing required installation depth to 12 inches, including connectors.

• High power-to-size ratio
• Versatile design, as it accommodates either vertical or horizontal placement 
• Discreet appearance and form factor that fits into tight architectural spaces at only 12 inches deep including connectors
• Clean and low distortion output due to its proprietary high excursion driver and low air velocity port

​The USW-112XP is ideal for installations requiring high performance and versatility along with an appealing, discreet aesthetic appearance. Designed to be the ideal companion to Meyer Sound’s ULTRA-X20XP, it also complements the low frequencies in other Meyer Sound loudspeakers, such as the UP-4slim and those in the UPM family.

The USW-112XP has an operating frequency range of 35–140 Hz with a linear peak SPL of 119.5 dB, measured in half-space at 4 m and referred to 1 m using M-noise4. The bass reflex cabinet employs a low-velocity port based on the Meyer Sound USW-210P subwoofer design for high efficiency and low port distortion.

The cabinet houses an open-loop, Class-D power amplifier with signal processing including correction filters for phase and frequency response, and driver protection circuitry.

With IntelligentDC technology, the USW-112XP receives DC power and balanced audio from a single Phoenix 5-pin connector. Powering the loudspeakers from a Meyer Sound MPS IntelligentDC external power supply eliminates the need for wiring conduits while still preserving the advantages of self-powered systems.

The Meyer Sound MPS IntelligentDC power supplies distribute DC power and balanced audio to USW-112XP loudspeakers or other 

Meyer Sound IntelligentDC loudspeakers. The USW-112XP’s amplifier and signal-processing circuits store DC power and tolerate voltage drops, thereby accommodating light-gauge cables and lengthy cable runs. Composite multi-conductor cables, such as Belden® 1502 or equivalent, can deliver both DC power and balanced audio to loudspeakers at cable lengths up to 150 feet with just 1 dB of loss in peak SPL using 18 AWG wire for power. Longer cable lengths are possible with heavier gauge wires.

The two-channel MPS-482HP power supply is ideal for applications requiring a small channel count or the capability for mounting the supply remotely on a wall or ceiling, while the 8-channel MPS-488HP is suitable for larger installations. The MPS-488HP can be optionally purchased with an RMS module for connecting to Meyer Sound’s remote monitoring system.

Meyer Sound builds the USW-112XP cabinet from premium birch plywood coated with a durable slightly textured black finish and includes a powder-coated, round-perforated steel grille to protect the drivers. Weather protection and custom color finishes for specific cosmetic requirements are available options.

With its versatile shape, the USW-112XP can be placed on the ground in either horizontal or vertical positions to accommodate installation requirements.

The USW-112XP comes standard with M8 mounting points at the top and bottom for use with the optional U-bracket that enables wall, ceiling, or truss mounting. It also features an integral 35 mm pole mount receptacle with M20 threads for added stability.

Robust Bass for Any Space

• DISCREET SYSTEM ENHANCEMENT - The USW-112P self-powered subwoofer delivers powerful low-frequency performance in a compact, versatile package. It’s designed as an ideal companion for ULTRA‑X20 loudspeaker and complements a range of Meyer Sound loudspeakers including the UPM, UP‑4slim, Ashby‑5C, and Ashby‑8C. Its low-profile cabinet measures just 23.5 inches high by 13.5 inches wide by 12 inches deep, making it an ideal choice when space is limited.
• LEAN-AND-CLEAN LOW END - Count on the USW-112P to deliver clean, low-distortion output at any output level: Its proprietary 12” low-distortion, long-excursion driver enhances low-frequency performance in the 35 to 140Hz range, and its cabinet incorporates a low-air-velocity port tuned for high efficiency, linear response, and low distortion.
• POTENT PROCESSING - The USW-112P’s built-in Class D amplifier delivers a linear peak SPL of 123 dB, measured using M‑Noise. Sophisticated signal processing includes electronic crossover, correction filters for phase and frequency response, and driver-protection circuitry. The crossover accepts full-range signals, enabling daisy-chain signal distribution and eliminating the need for external crossovers in smaller systems.
• AGILITY PLUS STABILITY - The 47-pound USW-112P fits anywhere, from churches and clubs to restaurants and small theatres. Orient it in horizontal or vertical position; its two integrated M8 mounting points can be used with an optional U-bracket to enable wall, ceiling, or truss mounting. Other options include a 35mm stand-mount receptacle with M20 threads for added stability.

Flexible and Feature-Packed

• POWER THAT GOES THE DISTANCE - For applications where AC distribution is a limiting factor, the USW-112XP variant incorporates IntelligentDC technology, which receives balanced audio and DC power from a single composite cable—allowing for longer, lighter, conduit-free cable runs.
• MONITORING MADE EASY - USW-112 loudspeakers feature advanced telemetry data when equipped with the Milan option. Users opting for analogue connectivity can still specify Meyer Sound’s RMS platform, which lets you monitor essential performance parameters right from your Mac or Windows PC running Compass control software.
• STYLES FOR ALL SEASONS - The USW-112P’s premium birch plywood cabinet is available in custom finishes; a weather-protection option features sealed connectors, eliminating the need for rain hoods.
• EXTREMELY WELL-CONNECTED - The USW-112 may be configured with any of four connector panel options. Two AC-powered versions feature looping Powercon connectors with either 3-pin or 5-pin XLR audio I/O and optional RMS remote monitoring; an IntelligentDC variant receives audio and DC power over single cable via its 5-pin Phoenix connector. A Milan version features looping Neutrik TOP True1 connections for power and a single TOP Ethercon for audio over IP and telemetry data.

Why Self-Powered?

Self-powered loudspeakers offer several advantages over their passive counterparts when it comes to fidelity, reliability, and simplicity. The great part is, you’ll start to reap the benefits of a self-powered system before you even power up.

Ease of Deployment

System set-up is so much easier when you have fewer components and fewer cables to worry about being miswired. Since self-powered loudspeakers incorporate amplification, you’ll never have to deal with matching speakers to amplifiers or connecting components. You don’t have to worry about calibration of gain and crossover setting which means more time focusing on the show. Eliminating amp racks doesn’t just streamline system deployment, it streamlines your inventory whether you’re a rental house or a road warrior. And when you consider that the average amp rack weighs nearly 300 pounds and takes up four feet of truck space, the efficiencies get even clearer. Let alone when you want to fly the amplifier racks to get closer to the speakers, often requiring more rigging points and more motors.

Predictable, Reliable Operation

Internal amplification is closely matched to drivers. Because individual components have been optimized during manufacturing, you can expect consistent sound from show to show. Built-in, factory-optimized protection circuitry provides extra assurance without degrading signal quality. And, when you have less equipment, you have less risk of failure.

Better Frequency and Phase Response

Because self-powered loudspeakers incorporate sophisticated processing, they are calibrated to exhibit optimal response curves in key performance parameters. Active crossovers are more precise, sophisticated designs, and bi-amped systems are time aligned, eliminating phase issues. The result? Accurate sound throughout the speaker’s range, at any volume level.

Unparalleled Clarity

In powered monitors, internal amplifiers are precision-matched to drivers, delivering optimal power at all times for cleaner sound. And because amps are built into loudspeaker cabinets, there’s no need for long lengths of connecting cable, which can become prone to distortion and signal loss.

Tighter Transients

Since self-powered loudspeakers have very short internal cables, amps inside can more effectively dampen driver mechanical motion, which leads to better sonic accuracy and tighter, crisper transients. (And, there’s none of the loss in levels and signal quality inherent over long cable distances.)

Specifications

• ACOUSTICAL
  • Operating Frequency Range -  35 Hz – 140 Hz
  • Frequency Response -  36 Hz – 125 Hz ± 4 dB
  • Phase Response -  45 Hz – 120 Hz ±30°
  • Linear Peak SPL
    • 119.5 dB with > 10 dB crest factor (M-noise)
    • 119.5 dB (Pink Noise)
    • 121.5 dB (B-noise)
• TRANSDUCERS
  • Low Frequency -  One 12-inch cone driver; 3 Ω nominal impedance
• AUDIO INPUT
  • Type -  Differential, electronically balanced
  • Maximum Common Mode Range -  ±15 V DC, clamped to earth for voltage transient protection
  • Connector -  Phoenix 5-pin male
  • Input Impedance -  10 kΩ differential between Audio (+) and Audio (–)
  • Wiring
    • Pin 1: DC Power (–)
    • Pin 2: DC Power (+)
    • Pin 3: Audio Shield, Chassis/earth
    • Pin 4: Audio (–)
    • Pin 5: Audio (+)
  • Nominal Input Sensitivity -  0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
  • Input Level -  Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
• AMPLIFIER
  • Type -  Open-loop, Class-D 
  • Total Output Power -  600 W peak
  • THD, IM, TIM -  < 0.02%
  • Cooling -  Convection
• DC POWER
  • Connector -  Phoenix 5-pin male provides power and audio connection (see Wiring above) 
  • Safety Agency Rated Voltage Range -  48 V DC—Meyer Sound MPS-482HP or MPS-488HP Power Supply required (NEC ANSI/NFPA 70 Class 2 Wiring Approved)
• PHYSICAL
  • Dimensions (WxHxD) -  13.5 x 23.5 x 12 inch (343 x 597 x 305mm)
  • Weight -  43 lb (19.5 kg)
  • Enclosure -  Premium multi-ply birch with slightly textured black finish
  • Protective Grille -  Powder-coated, round-perforated steel
  • IP Rating -  IP54 for weather-protected units with rain hood properly installed
  • Rigging -  Two integrated M8 threaded points; 35 mm Pole Mount with M20 thread; optional U-bracket for wall, ceiling, or truss mounting