Alto TS415 2500W 15in Powered Speaker w/ Bluetooth
Model: TS415
About: Alto TS415 2500W 15in Powered Speaker w/ Bluetooth
The Alto TS415 is a 2,500W 15-inch 2-way powered speaker with Bluetooth, DSP and App control.
- 2500W for powerful performance
- FREE Alto App (iOS/Android) for remote configuration and control
- Bluetooth® audio streaming direct from device
- On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth®
- Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 15” driver, 2.5” (63 mm) high-temperature voice coil
- 1” exit ceramic driver with 1.4” (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design - pole-mountable, wedge monitor or flown application with integral M6 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the US
TrueSonic TS4 from Alto Professional
Louder. Clearer. Smarter. Where TS3 exceeded expectations, TS4 redefines them completely. Building on the legacy of our best-selling TrueSonic speakers, the TS4 Series delivers increased power, clearer sound, and advanced Bluetooth functions including streaming, speaker linking, and App control. Compact, lightweight, and designed for reliability, the new TS4 Series makes it simple to get great live sound at every event.
True Sonic Power
Whether you need a powerful vocal PA or club-shaking bass performance for a DJ set, TS4 speakers deliver loud, clear, room-filling sound for any application. With a 15-inch woofer, and a 1.4-inch compression driver, TS415 delivers 2500W of class-leading power and clarity in equal measure.
FREE Alto App for remote configuration and control
Available free for both Android and iOS, the Alto App gives hands-on remote control over Bluetooth levels, Speaker Use Modes, Custom EQ and Sub Size selection. Further, True Wireless Stereo linking can be configured remotely via the app to save time during setup.
Built-In 3-channel mixer
Every TS4 features an integrated 3-channel mixer, with two Mic/Line input channels and a dedicated Bluetooth channel. The Mic/Line channels feature XLR/TRS combo jacks and can be used with microphones, instruments, and line-level signals without the need for additional hardware or adjustment. Just plug straight into the rear panel and you’re up and running.
Simple Bluetooth Streaming & Speaker Linking
The ideal high-powered streaming solution, TS4’s built-in Bluetooth connectivity makes it easy to pair your laptop, phone or tablet and get the music pumping in no time at all. With the True Wireless Stereo function you can stream Bluetooth audio to two TS4 speakers in perfect stereo without the need for any cables.
DSP Modes for the best sound in every application
TS4’s three preset “Speaker Use” modes let you optimize the speaker for any application, so you’ll get great sound every time at the touch of a button. For even more control over your sound, you can configure a Custom EQ within the Alto App and remote adjust the settings from any listening point in the venue. You can even save your favorite Custom EQ setting direct to the TS4 for easy recall whenever you need it.
Versatile and Reliable
From the high-quality drivers to the fanless class D amplifiers, every aspect of the TS4 Series has been designed for superb reliability, whether used for mobile gigs and performances or fixed installation. Each speaker features a lightweight, sleek, black box design that can be used as the application demands - freestanding, as a wedge monitor, pole-mounted or suspended via the integrated suspension points.
Technical Specifications
- Output Power: 2500W
- Drivers Low-Frequency: 15.0” driver, 2.5” (63 mm) high-temperature voice coil. 1 x 800 W RMS @ 2 Ω.
- High Frequency: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 450 W @ 4 Ω.
- Crossover Frequency: 2 kHz
- Maximum SPL: 135 dB (peak), 132 dB (continuous) (dB-SPL @ 1 m)
- Frequency Response: 44Hz – 20 kHz (+/-3 dB)
- Frequency Range: 33Hz – 20 kHz (-10 dB)
- Horn Coverage: 90° horizontal x 60° vertical (nominal)
- Connectors:
- (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced)
- (1) XLR output (Link)
- (1) IEC power cable input
- Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
- Line Gain/Volume Control Range: -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output
- Mic/Inst. Gain/Volume Control Range: -∞ to +50 dB
- USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Blue-tooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped)(1) Bluetooth LED (Blue)(1) Link LED (Orange)(4) DSP Presets LED (Green)(3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz;
- Consumption: 1100W
- Fuse: 100-120V T10AL AC250V;
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
- Operating Temperature: -10°C to 45°C (14°F to 113°F)
- Dimensions (height x width x depth) 25.3” x 16.4” x 15.8” / 643 x 417.5 x 402 mm
- Weight: 38.0 lbs. / 17.2 kg
UPC: 10816311012062
Videos: Alto TS415 2500W 15in Powered Speaker w/ Bluetooth
Reviews: Alto TS415 2500W 15in Powered Speaker w/ Bluetooth
Relatively light weight
Bluetooth works well
Good for a DJ
Useful app
Price
Relatively Light Weight
I had previously been using a pair of Yamaha DXR12 and did a side by side comparison. The Yamaha has a 12" woofer while the TS415 obviously has a 15". The first thing I did was ignore the Alto 2500 watts claim. I see this as an almost meaningless number. The Yamahas are rated at 1100 watts but both speakers have a similar spl and sound equally loud as they reach their clipping points and they are both plenty loud! The Yamaha is slightly heavier but then again I have had them for a few years and they still crank the tunes and look good. There is no doubt the Alto produces noticably more bass with the mixer at the same settings which is to be expected from the 15" woofer. Pick the right track and you can feel the bass.
The bluetooth connection works well. I linked to an iphone then to a mixer via a bluetooth transmitter. There is no difference in the sound from the TS415 on bluetooth or hard wired. Linking the two units via bluetooth for stereo was simple and again works well. If for some reason you don't want to use speaker cables then the bluetooth connection is a solid alternative. The app provides control of the sound when using bluetooth. There are four settings, EQ off, Live, DJ and Custom. With the EQ off the speaker presents with a flat signal and sounds good. "Live" kills the bass and boosts the mids while the "DJ" setting boosts the bass and the highs. Custom allows the user to adjust one frequency and for me is not that useful. The app does allow the user to stand out front during a sound check to set volume and EQ settings.
Would I recommend the TS415, yes I would, especially for a DJ or a sound reinforcement setting. The bass is ample while the mids and highs are clear, not quite as clear as the Yamaha but it is only noticible when comparing the two side by side and even then only if one is being overly critical. If you use a sub in your set up then the Yamaha or something similar is your mark, perhaps even the Alto TS412. If you are using a speaker for vocals then I personally wouldn't go for the TS415. But if you are looking for a reasonably priced speaker with good bass for DJ work, give the TS415 a listen.
Warranty: Alto TS415 2500W 15in Powered Speaker w/ Bluetooth
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
1 year warranty from date of purchase. This warranty doesn’t cover liquid contamination, physical or shipping damage, abnormal use and overdriven speakers.
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered