Palmer PAN08 19in 4-Channel Active DI/Line Isolation Box
Model: PAN08
About: Palmer PAN08 19in 4-Channel Active DI/Line Isolation Box
The PAN08 is a multifunctional device. Each of the four channels can be used independently as an active DI box, line isolation box or booster. The combination socket input accepts unbalanced and balanced signals. The output has dual transformer balanced XLR jacks (front and rear).
The signal level can be attenuated by 20 dB for microphone inputs, but can also be boosted in three stages by up to 18 dB for LINE inputs if necessary. With an output level of +12 dBu on a load of 600 Ohms with 0.05 % THD / 40 Hz and an output noise level of less than -110 dBu, the unit meets even high professional standards. One special feature that is worthy of mention is battery power. The supply voltage may range from 9 to 18 V. Thus the PAN08 can also be used without mains power outdoors.
Specifications:
- Product type: DI box
- Type: active
- Channels: 4
- Inputs: 4
- Input connectors: 6.3 mm Jack, XLR
- Max. input level: +12 dBu
- Input impedance: Balanced: 20k Ohm(s)
- Outputs: 8
- THRU outputs/channel: 0
- Output connectors: XLR
- Max. output level: +12 dB
- Output impedance: 600 Ohm(s)
- Frequency response: 20 - 20000 Hz
- Transformer balanced: yes
- Ratio: Variabel
- Indicators: Power
- Controls: 2 x gain, attenuator, ground lift
- Operating voltage: 9 V DC power supply
- Cabinet material: sheet steel
- Cabinet surface: powder coated
- Width: 480 mm
- Width: 19"
- Depth: 90 mm
- Height: 45 mm
- Height: 1 U
- Weight: 1.59 kg
UPC: 4049521109133
Reviews: Palmer PAN08 19in 4-Channel Active DI/Line Isolation Box
Warranty: Palmer PAN08 19in 4-Channel Active DI/Line Isolation Box
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
3 Years Limited
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
