Middle Atlantic NEXSYS 9 Outlet, 20 Amp Rackmount Power with Surge Protection

About: Middle Atlantic NEXSYS 9 Outlet, 20 Amp Rackmount Power with Surge Protection

The NEXSYS PDUs are built on a promise that we’ve kept for over two decades – more than half the life of the company – that our products are designed, engineered, and built for AV. Every NEXSYS rackmount PDU is available in 15A and 20A and always have surge and voltage protection making it easy to select the right PDU for the job. Still need more? Each NEXSYS rackmount PDUs can be controlled remotely via contact closure. Just choose NEXSYS.

Features & Benefits

• Enhanced Series Surge Protection
  • Industry’s fastest patented non-degrading surge technology
  • Protects equipment without contaminating system ground
  • Industry-leading 12 year warranty
  • 100% MOV-free design – unlike any competitive offering
• Worried about the under/over voltage? Don’t. With the selectable on/off voltage protection from the front of the unit, it gives the option to protect sensitive equipment from over/under voltage scenarios.
  • If the voltage protection is on and an over or under voltage event happens the outlets will automatically be turned off to protect the equipment. Once the power restores within the acceptable voltage range the PDU will automatically turn the outlets back on.
• IEC Inlet: Allows for cleaner cable management by selecting your desired length of power cord.
• A standard 9’ cord is included with all models
• Tired of blocked outlets? You pay for 8 outlets and we think you should be able to use all 8 outlets! The rear outlets are oriented for easier plugging of DC transformers (wall warts) eliminating blocked outlets
• For your convenience. An outlet on the front of the unit if you need it.

Specifications

• General
  • Nominal Voltage -  120VAC
  • Voltage Range -  Minimum: 80VAC, Maximum: 140VAC
  • Frequency -  60 Hz
  • Maximum Peak Load -  20A
  • Rated Load -  16A
  • Number of Outlets -  9
  • Outlet Type -  NEMA 5-20R
  • Overload Protection -  Circuit Breaker
  • Outlet Control -  Contact Closure
  • No Load Power Dissipation -  <1W
  • Input Power Cord -  SignalSAFE IEC to 5-20P, 10’ (3M)
  • Certifications -  UL 62368, UL 1283, UL 1449, FCC Class B, ICES 7
• Hardware
  • Surge Protection Type - Series Protection
  • Voltage Protection Rating -  330V (L-N); Type 3 SPD
  • Maximum Applied Surge Voltage -  6000 Volts (1.2 x 50μS Pulse, Industry Standard Combination Wave Per IEEEC62.41)
  • Maximum Applied Surge Current -  Unlimited (Due to Inherent Current Limiting)
  • Maximum Applied Surge Energy -  Unlimited (Due to Inherent Current Limiting)
  • EMI Filter, Differential Mode -  50dB@100kHz
  • 50Ω Load -  50dB@30MHz
  • EMI Filter, Common Mode -  30dB@100kHz 
  • 50Ω Load -  50dB@30MHz
  • Overvoltage Threshold -  Upper Limit Cutoff: 135V RMS Upper Limit Restore: 126V RMS
  • Undervoltage Threshold -  Lower Limit Cutoff: 100V RMS Lower Limit Restore: 105V RMS
• Physical
  • Cord Length -  9 ft (2.7 m)
  • Rack Units -  1 RU
    Dimensions (WxHxD) -  19 x 1.735 x 8.75 Inch (483 x 44 x 222mm)
  • Weight -  8.6 lb. (3.9 kg)