Shure SLXD4Q+ Quad Channel Receiver (Freq: G57)

About: Shure SLXD4Q+ Quad Channel Receiver (Freq: G57)

The SLXD4Q+ Quad Channel Receiver is the best choice for streamlining SLX-D digital wireless performance into a space-saving footprint. Featuring expanded capabilities for confident speech presentation and vocal performance - from lecture halls to live entertainment.

The SLXD4Q Quad Channel Receiver builds upon the rich feature set of SLX-D Digital Wireless receivers with an exciting suite of new and improved features.

• 138MHz Wide Tuning Range. Allows every SLX-D Quad Receiver to be used country-wide, without the need to manage narrow range receiver inventory.
• Four channels in one rack space. Space-saving design allows you to expand with minimal impact
• Audio Summing. Don’t have 4 open mixer channels? Set and combine audio levels for three, two or one Quad Receiver audio output choices to match your open inputs.
• RF Cascade. Create an 8 channel SLX-D receiver system by simply connecting two SLX-D Quad Receivers. No additional accessories or cables required.
• Standard and Dante Compatibility. Every SLXD4Q+ Quad Receiver has 4 XLR and 4 ¼” outputs and 2 local ethernet connections. The SLXD4QDAN+ includes those while upgrading to ethernet-based Dante connectivity.

FOUR CHANNELS OF WIRELESS VERSATILITY, WHEREVER REQUIRED

SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with streamlined network-ready setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design in a convenient full-rack quad configuration, the SLXD4Q+ efficiently saves space and accessories, and easily scales to match channel requirements.

• Four channels in one rack space
• Wide 138 MHz tuning range
• 32 available channels per frequency band (region dependent)
• Transparent 24-bit digital audio
• 118 dB dynamic range
• Audio Summing matches receiver output to available mixer channels (4,3,2 or 1)
• 4 XLR and 4 1/4" outputs and 2 local ethernet connections
• RF Cascade creates an 8-channel system by linking two SLXD4Q+ together, no other accessories required
• Bias Voltage power supply management
• Digital predictive switching diversity
• Easy pairing of transmitters and receivers over IR scan and sync
• Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
• Rugged metal construction

Specifications

• Housing: Galvanized Steel
• Power Requirements: 15 V @ 1.03 A with Dante; 15 V @ 0.9 A without Dante
• RF Input
  • Spurious Rejection: >75 dB, typical
  • Connector Type: BNC
  • Impedance: 50 Ω
  • Bias Voltage
    • 15 V DC, 150 mA maximum, per antenna
    • switchable on-off
• Audio Output
  • Audio Frequency Response: 20  Hz– 20 kHz (+1, -2 dB)
  • Gain Adjustment Range: -18 to +42 dB in 1 dB steps
  • Configuration
    • 1/4" (6.35 mm): Balanced (Tip = audio +, Ring = audio -, Sleeve = ground )
    • XLR: Balanced (1=ground, 2=audio +, 3=audio −)
  • Impedance
    • 1/4" (6.35 mm): 1.1 kΩ (550 Ω Unbalanced)
    • XLR (line): 500 Ω (250 Ω Unbalanced)
    • XLR (mic): 150 Ω
  • Full Scale Output
    • 1/4" (6.35 mm): +12 dBV Unbalanced, +18 dBV Balanced
    • XLR: LINE setting= +18  dBV, MIC setting= -12  dBV
  • Mic/Line Switch: 30 dB pad
  • Phantom Power Protection
    • 1/4" (6.35 mm): Yes
    • XLR: Yes
• Cascade Output
  • Connector Type: BNC
    • Note: For connection of one additional receiver in the same band
  • Configuration: Unbalanced
  • Impedance: 50 Ω
  • Insertion Gain: 0–2 dB, typical
• Networking
  • Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 100 m (328 ft)
• Dimensions (HxWxD): 42 x 393 x 152 mm (1.65 x 15.47 x 5.98 in.)
• Weight: 1750 g, without antennas

What's included

• 1x SLXD4Q+ Receiver
• 2x 1/4 Wave Antennas
• 2x Bulkhead BNC Adapter
• 2x BNC Cable (22")
• 1x Rack Mounting Hardware Kit
• 2x Bracket
• 1x Ethernet Cable
• 1x PS60 Power Supply
• 1x Adhesive foot