Shure MXWAPXD2 2-Channel Access Point Transceiver and Charger

About: Shure MXWAPXD2 2-Channel Access Point Transceiver and Charger

The MXWAPXD2 is a 2-channel access point for Microflex Wireless neXt 2 systems. It combines sophisticated Automatic Frequency Management, powerful IntelliMix DSP audio processing, convenient microphone charging, and flexible audio and control interfaces in a compact and discreet form factor.

The next step in audio for hybrid events.

• Built-in charging slots for two MXW1X bodypack, MXW2X handheld, or MXW6X boundary transmitters
• Automatic Frequency Management finds open channels in the 1.9 GHz DECT band and avoids interference without interrupting audio
• Onboard IntelliMix DSP includes automatic mixing, echo cancellation, noise reduction, and automatic gain control to eliminate annoying distractions
• Presets configure the system for presentations or conferences to send mic & program audio to remote participants, room loudspeakers, or both
• Analog, Dante, and USB-C interfaces for easy connection to a computer, sound system, and videoconferencing codec
• Dual RJ45 network ports allow Dante audio and control signals to be separated for increased security
• External USB-C power supply

Specifications

• ANALOG INPUT
  • Maximum Input Level
    • Line Level Input +28 dBV
    • Aux Level Input +15 dBV
  • Frequency Response - 20 Hz ‒ 26 kHz (+0.5 dB / -3 dB)
  • Total Harmonic Distortion + Noise
    • Line Level Input 0.03% (typical)
    • Aux Level Input 0.02% (typical)
  • Dynamic Range - 115 dB (A-weighted), 113 dB (unweighted), typical
    • Line and Aux level input setting. Measured at Dante output. MXWAPXD2 set to Direct Mode.
  • Preamplifier Equivalent Input Noise
    • Line Level Input -87 dBV (A-weighted), typical, 22 Hz ‒ 22 kHz BW
    • Aux Level Input -99 dBV (A-weighted), typical, 22 Hz ‒ 22 kHz BW
  • Input Impedance
    • Line Level Input ~2.9 kΩ @ 1 kHz
    • Aux Level Input ~3.1 kΩ @ 1 kHz
  • Configuration - Balanced
  • Type - 3-pin Phoenix: Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -
• ANALOG OUTPUTS
  • Maximum Output Level
    • Line Level Output +17 dBV
    • Aux Level Output +6 dBV
    • Mic Level Output -13 dBV
  • Frequency Response - 20 Hz ‒ 22 kHz (+0.5 dB / -3 dB)
  • Total Harmonic Distortion + Noise - 0.02%, typical
    • Line, Aux, Mic output level settings
  • Dynamic Range
    • Line Level Output 118 dB (A-weighted), 115 dB (unweighted), typical
    • Aux Level Output 118 dB (A-weighted), 115 dB (unweighted), typical
    • Mic Level Output 108 dB (A-weighted), 105 dB (unweighted), typical
      • Audio injected at Dante input. MXWAPXD2 set to Direct Mode.
  • Load Impedance - >600 Ω, typical
  • Type - 3-pin Phoenix: Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -
• POWER
  • Power Requirement - 4.5V ‒ 5.5V, 2500 mA (via USB-C)
  • Power Consumption - 12.5 W (typical)
  • Network Interface - Dual ‒ RJ45: Gigabit Ethernet, Dante digital audio
  • Docking Interface - 5 V / 0.5 A
  • SBC10-USB45WPD-* Power Supply
    • Input (100-240 V AC) 50-60 Hz, 1.2 A
    • Output (5.0 V / 9.0 V / 12.0 V / 15.0 V DC) 3.0 A, 45.0 W (max)
    • Output (20.0 V DC) 2.25 A, 45.0 W (max)
      • * Varies by region: UTJ, E, UK, IN, BR, AR, AZ
• HOUSING
  • Antenna Type - Internal Shure Custom PIFA
  • Housing - Molded Plastic Cover with Cast Zinc Metal Base
  • Dimensions - 252.7mm × 202.7mm × 48.8mm (9.95" × 7.98" × 1.92")
  • Weight - 1111g