Lectrosonics Quadpack Power/Audio Adapter

About: Lectrosonics Quadpack Power/Audio Adapter

Designed for portable applications in the field, the Quadpack simplifies the mounting and interconnec- tion of two SR receivers for 4 audio channels. The Quadpack’s lightweight and rugged design make it perfect for bag systems, leaving you plenty of room for your mixer, recorder and transmitters for audio feed to cameras. The Quadpack keeps it all neatly routed and easy to access with one set of audio outputs to feed a recorder and the other to feed the mixer.

• Accepts two SR Series receivers (not included; sold separately)
• Uses 25-pin Unislot adapter
• Balanced XLR audio outputs
• Balanced TA3M audio outputs
• Output jack panels can be reversed
• Locking coaxial DC power connector
• 4-pin Hirose DC power connector
• Powder coated aluminum housing

The Quadpack uses an external DC source through one or both of the connectors. Circuitry is in place be- tween the two jacks to pull power from the jack with the higher voltage. You can use this to provide a backup power supply to avoid interruption if the power is cut to one of the jacks for any reason.

Side Panels

The Quadpack provides LZR and Hirose 4-pin power connectors, 4 balanced TA3 outputs and 4 balanced XLR connectors on interchangeable side panels.

The side panels have four screws, two on the top and two on the bottom, that you can use to remove the panel and switch panels to their opposite sides if needed.

Use a connector (such as Hirose, Power or XLR) on one of the lower connectors to remove the panel. Prying or forcing the panel open with a screwdriver or other tool may bend pins in the connector and cause damage.

Pin connectors for side panels are located on the lower end of the panel

Specifications

• Power Interface Connector: dB-25 (Unislot)
• Audio Outputs
  • 4 Balanced XLR-Male
  • 4 Balanced TA3-Male
• Power
  • Hirose 4-pin
  • Coaxial (LZR)
• Power Requirements
  • 7 to 18 VDC
  • 400 mA max
• Dimensions (HxWxD): 4.95 x 9.4 x 1.4 inch (125.73 x 238.76 x 35.56 mm)
• Weight:
  • Assembly only: 1.46 lbs (0.6614 kg)
  • With 2-SRa5P receivers:  2.27 lbs (1.031 kg)
  • With 2-SRa5P receivers:  2.37 lbs (1.077 kg)

What's Included

• 1x Slot Plug (Part #P1139)
• 1x Combo Tool (Part #P1246)
• 1x Manual