Accessories
-
RDL ST-LCR1 Logic Controlled Relay - Momentary
The ST-LCR1 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure. The ST-LCR1 provides momentary operation and is ideally suited where... -
RDL ST-PA6 6W Mono Audio Amplifier
The ST-PA6 represents the second generation of RDLs® breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most... -
RDL ST-LCR1H High Power Logic Controlled Relay
The ST-LCR1H provides dry-switching contacts for high power switching, an LED indicator showing relay activation, and input connections. Switching contacts are suited to switching... -
RDL ST-LCR2 Logic Controlled Relay - Latching
The ST-LCR2 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure. The ST-LCR2 is used where momentary pulses must alternately toggle... -
C2G 40884 10K Trim Pot Volume Knob w/ Mute (White / Decora)
This Wall plate volume control is ideal for schools or meeting rooms where it conveniently adds control to any 10kΩ, 3 wire volume controllable amp / mixer / DSP. Designed... -
RDL ST-PA2 2W Mono Audio Amplifier
The ST-PA2 features a single, unbalanced audio input, a gain control, and two outputs. The first output is designed to deliver a clean 2 watts RMS into an 8 Ω speaker. The... -
TOA B-11S Balanced Line Input with Mute-Receive
For balanced or unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Transformer isolation minimizes ground loop problems when connecting remote... -
Q-SYS QIO-LVR4 4 Low-Voltage Relay Network Expander
Q-SYS QIO-LVR4 is a network audio output expander designed to integrate seamlessly with the Q-SYS Ecosystem, providing four balanced line outputs with variable voltage support.... -
RDL ST-LCR3 Logic Controlled Relay - Dual Alternate Pulse
The ST-LCR3 is ideally suited to applications where momentary pulses are needed from a single control signal. The module provides a momentary pulse when a logic signal at its... -
Genelec 8000-202 Short Ceiling Mount with Ball Joint - Black
A short and versatile ceiling mount with a ball joint enabling 360-degree rotation and maximum 90-degree tilt, depending on the loudspeaker model and mounting. Available in black... -
Q-SYS QIO-FLEX4A 4 Flex Inputs and 2 Amp Output Network Expander
Q-SYS QIO-FLEX4A is a versatile networked audio I/O expander designed to seamlessly integrate with the Q-SYS Ecosystem. Featuring four flexible audio I/O channels, it enables... -
Q-SYS unD6IO Multi-IO Dante Network Audio Wall Plate
Attero Tech unD6IO is a versatile Dante network audio interface designed to seamlessly integrate analog audio equipment into Dante or AES67 audio networks. It features two... -
Tascam BO-32DE 32ch Euroblock / Pheonix to DB25 DSub Patch Panel
Tascam BO-32DE 32-Channel Euroblock to D-Sub Input Adaptor for Professional Installations The TASCAM BO-32DE is a rugged, rackmounted audio adaptor designed for professional... -
Allen & Heath Rack Mount Kit for DT Dante Interfaces (1U)
Rack mount kit for installation of up to two Allen & Heath DT units in a 1U 19″ slot onstage or at FOH. -
Q-SYS QIO-AES8X8 AES Audio In/ Out Network Expander
Q-SYS QIO-AES8X8 is a networked digital audio I/O expander designed to integrate seamlessly with the Q-SYS Ecosystem, providing eight AES3 digital audio inputs and eight AES3... -
Q-SYS unDX2I 2x2 mic/line I/O Dante Wall Plate
Attero Tech unDX2IO+ is a versatile Dante network audio interface designed to seamlessly integrate analog audio equipment into Dante or AES67 audio networks. It features two... -
LEA Professional RCAF-2 Female RCA to Balanced 3-Pin Connector
In an effort to reduce any points of friction for CONNECTSERIES users, we have created custom cables to aid users that are attempting to input an unbalanced RCA signal... -
Q-SYS Axon D2i Dante & AES67 Analog Input Wallplate w/ PoE
The Axon D2i is a single-gang Dante/AES67 network audio I/O wallplate designed to integrate analog audio devices into networked AV systems, including the Q-SYS Ecosystem. It... -
Q-SYS QIO-PSU Power Supply
The QIO-PSU is a re-branded MEAN WELL GST90A24. The output voltage is 24V with a rated current of 3.75A, and a maximum output of 90W. The QIO-PSU is capable of powering up to four... -
Q-SYS QIO-S4 Network I/O Expander
Q-SYS QIO-S4 is a network control endpoint designed to enhance the Q-SYS Ecosystem by providing seamless integration with non-networked control devices through serial... -
TOA Canada BB-580 Back Box for PC-580R & PC-580RV Speakers
The BB-580W Round Flush Mount Back Box is a metal case that can be attached to TOA’s PC-580RU/RVU flush-mount ceiling speakers for flush-mounted applications. Specifications... -
TOA M-800RCT Remote Audio Control Panel w/ Touch Display for M-8080D-AM (White)
Designed for exclusive use with the M-8080D, the M-800RCT Remote Audio Control Panel with touch display , can do volume adjustments, routing choices, preset choices, and give... -
TOA Q-HY-TB2 Mounting Channel (10-Pack)
The Q-HY-TB2 is a mounting channel to be utilized in pairs on either side of enclosure for installation of recessed speaker in T-bar ceiling. Specifications: Finish: Heavy... -
Allen & Heath IP1 One Rotary Wallplate Controller (White)
The IP1 is part of the Allen & Heath IP Series of remote controllers. It interfaces with the AHM, dLive or Avantis mixing system via standard TCP/IP Network connections...