Splitters & Combiners
-
ART SplitComPro Mic Splitter/Combiner
Use the SPLITCom Pro to Split or Combine balanced low impedance microphone signals. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from... -
Radial JS2 Two-Way Mic Splitter
The Radial JS2 is a Jensen Transformer equipped mic splitter that allow a balanced source to drive multiple destinations via standard XLR connectors. These passive devices feature... -
Rolls MS20C Splitter/Combiner/Isolator
The MS20c Splitter / Combiner / Isolator will split a single balanced XLR signal into two isolated signals, combine two balanced XLR signals together into a single, or simply... -
Radial ProMS2 Passive Microphone Splitter
The Radial ProMS2 is a high performance mic splitter that accepts a balanced microphone signal and sends it to three outputs simultaneously. As a passive device, there is no need... -
Radial JS3 Three-Way Mic Splitter
The Radial JS2 and JS3 are high performance balanced mic level splitters that let you to split a signal and feed multiple destinations at the same time. Typical applications... -
Radial LX-2 Passive Line Splitter & Attenuator
The Radial LX-2 ™ is a passive balanced line level audio splitter that allows you to easily send an audio signal to two different destinations at once without noise, while... -
RDL ST-DA3 Line Level Distribution Amplifier - 1x3
The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and... -
ART SplitMix4 4-Channel Passive Splitter/Mixer
The SPLITMix4 is a fully passive hybrid mixer that offers a wide variety of configurations. Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to... -
ART S8 8-Channel Mic Splitter
The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals (eight pairs). Each channel of the S8... -
ART S8-3Way 8-Channel 3-Way Mic Splitter
The S8-3WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals... -
Galaxy Audio JIB/S Jack In The Box XLR Splitter
Splits a microphone to two different inputs, like a POWERED HOT SPOT (or other powered monitor) and a console Phantom block circuitry prevents interference from two different... -
Galaxy Audio JIB/S Jack In The Box TRS Splitter
Splits a single monitor feed to as many as four POWERED HOT SPOTS (or other powered monitors) Splits a single headphone feed to multiple headphones Balanced TRS inputs and outputs -
ART ProSplit Mic Splitter
The ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-of-House... -
Galaxy Audio JIB/R Jack In The Box RCA Combiner
Combines (sums) two stereo CD or tape players into one mono (XLR or 1/4 inch) output Frees mixer channels Phantom block on the XLR prevents phantom power from reaching CD/tape... -
Radial Ox8-r 8-Channel 3-way Mic Splitter (Radial Transformers)
The Radial OX8 is a high-performance 8-channel microphone splitter that lets you send a microphone signal to as many as three consoles at the same time. Each channel is configured... -
Galaxy Audio JIB/C Jack In The Box XLR Combiner
Add an additional microphone to the POWERED HOT SPOT (or other powered monitor) when all inputs are in use Permits phantom power to go to both microphones if available from the... -
Radial Ox8-j 8-Channel 3-way Mic Splitter (Jensen Transformers)
The Radial OX8 is a high-performance 8-channel microphone splitter that lets you send a microphone signal to as many as three consoles at the same time. Each channel is configured... -
Radial LX8 Line Level Signal Splitter and Isolator
The Radial LX8 is an eight channel passive line-level isolator designed specifically to manage balanced signals in professional audio systems. Applications include splitting a... -
BRTB Cobra12 12 Channel Isolated Mic Splitter
12 Channel mic isolator with switchable ground lift for stage splits, IEM (in ear monitor), or any other isolation / split application! Front 12 Neutrik Swiss made non-locking...
-
Whirlwind SPLIT 6 Line Level Parallel Splitter
Features 1 female XLR input wired to 6 male XLR outputs. Perfect when adding extra amplifiers to a system, connecting multiple powered speakers, splitting intercom lines,... -
Palmer PLS02 Dual Channel Line Splitter
Palmer line splitters are used when a signal source must be sent to multiple inputs. For example, when one mixer output is supposed to supply signals to multiple power amplifiers... -
Whirlwind SP1X2 Mic Splitter (1x2)
The SP1X2 provide one direct and one transformer isolated outputs, respectively, from a mic level input. Each transformer isolated output on these devices features a ground lift... -
RDL RU-ADA4D Audio Distribution Amplifier
The RU-ADA4D is a four channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide... -
Palmer PRMLS 4-Channel Line Splitbox
Designed to split line level signals, features similar to PRM-MS with the exception of decoupling resistors to obtain the lowest possible source impedance. Specifications: Product...