Flock Audio CX 8-Channel Mic/Instrument Line Level Adjuster Module

About: Flock Audio CX 8-Channel Mic/Instrument Line Level Adjuster Module

CX is a 8 Channel Hardware Module Compatible with all Flock Audio PATCH Series Models allowing all types of Analog Audio Signals to correctly route through the PATCH Series (+4 Line Level Design) for the cleanest and transparent analog audio routing experience possible. Assignable, Customizable & Controlled through the PATCH APP and PATCH APP DX.​

THE FRONT PANEL - 8x XLR/Combo Input Connections

Seamlessly Connect Microphones, Instruments & more Audio directly to the Front Inputs of CX Hardware

THE REAR PANEL - 8x Output Channels (DB25/DSUB)

Connect directly to any PATCH Series Models Inputs and begin setting up your CX with PATCH APP or PATCH APP DX 

CX MENU

Setup and Control CX right from the PATCH APP or PATCH APP DX Software. 

• HARDWARE INPUT - Select any "input" connected to your patch series hardware.
• SIGNAL TYPE - Select a "signal type" that represents your incoming analog signal.
• ADJUST - Finely tune your level with the adjust knob.
• LEVEL - Review, observe, and confirm your operating signal level.
• TABS - Setup, tab, and use multiple CX modules right from the one menu

Features

• 8 Channel Mic/Instrument Level XLR/TRS Combo Inputs
• 8 Channel Line Level DB-25/D-SUB Output Tascam Standard Pinout Format Connectors
• 8 Assignable Independent Channels of 48V Phantom Power
• PATCH APP & PATCH APP DX - Setup & Controlling Software (OSX, Windows, iOS)
• Connect any type of analog audio signal to the PATCH Series via the CX Hardware
• No AD/DA Conversion, No Latency, 100% Sonically Transparent Analog Signal Path
• Stand Alone Desk Module or Rack Ear Mountable Package Design (Ears Included)
• External Power Supply w/ Threaded Locking Connector (IEC Cable Included)
• 10 Ft. - USB 2.0 (USB-A to USB-B) Cable for Host Control (Cable Included)
• Unit Dimensions: 1.75”(H) x 10.25” (L) x 7” (D) - 5 lbs