Level Matching Transformers
-
ART CLEANbox Pro Dual Channel Level Converter
The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable... -
Hosa MIT-176 Impedance Transformer XLR to 1/4in
This adaptor is designed to match 200R output impedance to 50K input impedance. It is ideal for connecting a microphone to hi-Z instrument jack. Maximizes signal fidelity when... -
RapcoHorizon LTIGLBLOX 3.5mm to XLR Interface
LTIGLBLOX is a consumer to pro interface. It converts input from consumer grade equipment (laptop computers, MP3 players, CD players) to a mic level balanced... -
RapcoHorizon LTIBLOX Laptop Interface
LTIBLOX is a consumer to pro interface. It converts input from consumer grade equipment (laptop computers, MP3 players, CD players) to a mic level balanced... -
Radial J+4 Active Stereo Line Driver
The Radial J+4 is a stereo interface designed to accept unbalanced low output level devices such as instruments, computers or CD players and boost the signal to a balanced +4dB... -
Hosa MIT-129 Impedance Transformer 1/4in to XLR
This adaptor is designed to match 50K output impedance to 200R input impedance. It is ideal for connecting a hi-Z instrument to a microphone input. • Maximizes signal... -
RapcoHorizon LTI-1 Laptop Interface
Connect your laptop's headphone or audio out to a professional sound system. Stereo or summed mono operation selectable by user. Built in ground lift... -
Canare BCJ-XJ-TRC 110 Ohm to 75 Ohm Impedance Transformer
110 - 75 ohm Impedance Transformer. 3-Pin female XLR to female BNC Features SMPTE 276M and AES3 Transmission Standard Coaxial transmission of 2 Channel Digital Audio Allows... -
RDL TX-1A Balanced to Unbalanced Transformer - Adjustable
Features: Provides transformer isolation between balanced line and unbalanced input Level trimpot adjusts output 4 to 24 dB below input level Input may be 10 kΩ bridging or... -
Whirlwind ISOPOD Line Level Summing Balancer (3.5mm to XLR)
Housed in a high impact nylon casing, the ISOPOD safely sums to mono and transformer isolates unbalanced 1/8" (3.5mm) stereo connections to balanced, XLR. Nominal insertion... -
RapcoHorizon DBBLOX LoZ-HiZ Imedance Converter
DBBLOX converts high impedance source to low impedance load. Features XLR male output and 1/4 inch input. Features Self-contained signal conversion Convert low... -
RDL TX-LM2 Line Level to Microphone Level Transformer
Features: Matches balanced 600 Ω phone (or other line) into mic or line input Dual outputs:Unbalanced line-level and balanced mic-level Frequency response: 20 Hz to 20 kHz... -
RDL TX-J2 Unbalanced Input Transformer
Unbalanced stereo inputs to summed balanced mono output Features: Mix two unbalanced audio signals to mono balanced Combine stereo into mono with balanced output Unbalanced to... -
Whirlwind IMPAD20 20dB XLR Pad
Input a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads. The IMP PAD 20 provides 20dB attenuation. A set of IMP PADs is a... -
Shure Line Matching Transformer
The Shure A85F is a low- to high-impedance microphone-matching transformer that provides 24 dB of signal increase gain. It has balanced female XLR and unbalanced high impedance... -
Hosa MIT-435 Impedance Transformer XLR to 1/4in TS
This adaptor is designed to match 200R output impedance to 50K input impedance. It is ideal for connecting a microphone to hi-Z instrument jack. Maximizes signal fidelity when... -
Shure 50 dB Attenuator
The Shure A15LA 50 dB attenuator reduces the level of an audio signal by 50dB. This allows a line level output such as an aux level output from a mixer or playback device, to be... -
Audio Technica CP8201 Mic Impedance Transformer
The Audio-Technica CP8201 Microphone Impedance Matching Transformer is designed to connect a low-impedance microphone to a high-impedance electronic input. The high-quality... -
Ebtech LLS-8 Line Level Shifter (8 Channel)
What do you do when you need to connect a low volume -10dBV output like a cassette deck, CD player or synthesizer into a high volume +4dBu input like a multitrack recorder, mixer... -
Rolls MB15b Promatch 2-Way Stereo Converter
The MB15 ProMatch converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, labeled 1, has two XLR inputs and stereo RCA... -
DSAN LSP-1 Laptop Sound Port 3.5mm to XLR Adapter
The Laptop Sound Port is a compact adapter that plugs into a laptop computer's speaker jack, changes the output to a mono balanced mic-level signal and mates with standard XLR... -
RDL EZ-AFC2 Audio Format Converter
The EZ-AFC2 is a stereo bi-directional audio format converter with level controls. Conversion is provided between balanced rear-panel XLR jacks and unbalanced front-panel RCA... -
Shure Line Matching Transformer (XLR to 1/4'' Male Plug/Female Jack)
The Shure A95UF is a reversible transformer that matches low-impedance microphones to high-impedance inputs or high-impedance microphones to low-impedance inputs. The transformer... -
Shure Line Matching Transformer (Male XLR to 1/4'' Male Plug/Female Jack)
The Shure A95U is a reversible transformer that matches low- or high-impedance microphones to high- or low-impedance inputs. The transformer permits use of very long microphone...