Royer Labs dBooster2 Dual In-Line Signal Booster & DI
Model: RDB22
About: Royer Labs dBooster2 Dual In-Line Signal Booster & DI
The Royer dBooster2 features two channels of dBooster ribbon & dynamic microphone signal boosting and impedance buffering technology. Each channel also doubles as a high-impedance DI.
When used as a signal booster, both channels of the dBooster2 increase the level of passive low-output ribbon and dynamic microphones with a minimum of distortion or coloration. Designed for professional applications, each dBooster2 channel offers two levels of clean gain boost: 12dB or 20dB, selectable by a front panel switch.
The dBooster2’s Class A input presents a high source impedance to microphones, minimizing loading (damping) and improving headroom. By utilizing the 12/20dB gain switch, optimum balance between gain and headroom can be achieved for a variety of uses.
The dBooster2’s low-impedance output is an increased microphone-level signal that can drive a digital interface directly or a standard microphone preamplifier. It also minimizes signal loss on long cable runs.
When used as a DI for unbalanced guitar level sources, the dBooster2 provides either 0dB or 8dB of gain, selectable from the front panel switch. The single ended high-impedance (230K-Ohm) DI input maintains headroom and gain regardless of load, with minimal distortion or coloration.
RECOMMENDED APPLICATIONS
- Miking any low-volume sound source (acoustic instruments, vocals, etc.)
- Recording direct to a DAW interface
- Use on long cable runs to retain sound quality
- DI for direct electric guitar, electric bass, and other instruments
FEATURES
- 12dB and 20dB gain stages in Mic mode
- 0dB or 8dB gain in Hi-Z guitar input mode
- High input impedance
- Balanced Low output impedance
- Rugged case construction
- Ultra-low noise performance
- Ultra-low distortion
- Wide frequency bandwidth
BENEFITS
- Safe for use on all ribbon mics
- Increases headroom at the preamp
- Provides true electrical isolation
- Protects ribbon mics from phantom-power
- Minimizes mic loading
- Capable of driving difficult loads, such as mic splitters and vintage style preamps, without increased distortion or loss of gain
UPC: 850035900000
Reviews: Royer Labs dBooster2 Dual In-Line Signal Booster & DI
Warranty: Royer Labs dBooster2 Dual In-Line Signal Booster & DI
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
Royer Labs warrants its microphones to be free from defects in materials or imperfect workmanship. This lifetime warranty is offered to the original owner only and is not transferable. Royer Labs will repair or replace any Royer microphone that fails to meet factory specifications during the warranty period.
The original ribbon elements are warranted for a period of one year from the date of purchase and will be replaced one time during the warranty period if they fail. No other warranties are implied. Non-microphone items such as boxes and cables are not covered under this warranty.