Sonnect SOUND BULLET v2 Testing Tool

About: Sonnect SOUND BULLET v2 Testing Tool

The Sound Bullet is the original rechargeable pocket-size I-O audio tester. A powerful troubleshooting tool that is robust, reliable and portable.

The Sound Bullet is a pocket sized audio signal and wiring verification device designed to help your workflow.

The Sound Bullet gen 2 now features a USB-C charging port and a faster XLR auto-cycle cable-test mode. Furthermore the Sound Bullet comes with a non-latching output XLR, allowing for faster input line-checking.

The 5 core functions include:

• Generator
• Internal Speaker
• Phantom Power Check
• XLR Input Metering
• XLR Cable Tester

Generator

Generates pink noise or a 1kHz tone routed by default to the male XLR. The generator can be routed to the 1/4” to test DI boxes. Output can be adjusted to three levels -10, -20 and -40 dBu.

Use the generator and P48-test to carry out an input patch-check before sound checks or for verifying patch after quick stage change-overs. The Sound Bullet has been expertly designed to test the XLR line for full functionality.

Internal Speaker and 3.5mm Jack

Audio signals plugged into the female XLR or the 1/4” Jack connector are amplified and reproduced by the internal speaker or alternatively plug your headphones into the 3.5mm Jack output (adjust the volume by turning the knob).

Find Faults Quickly

A quick and handy powerful tool that can be used as a substitute for each element that handles audio, helping you locate any faults quickly and effectively.

Preventative Tool

The Sound Bullet should be used as a preventative tool for quick diagnosis and troubleshooting problems with complex audio setups.

Multiple Applications

Conceived for applications ranging from live entertainment audio installation to studio recording, broadcast and television. 

Test VT Audio Lines

Outputting the signal generator to the 3.5mm Mini-Jack port will allow you to test VT audio lines for conferences. Test Mini-Jack lines for theatre shows before production arrives on site.

Test DI Boxes

The 1/4” Jack acts as an input and an output. The Jack adaptor provided will allow you to connect the Sound Bullet straight to DI Boxes, guitar/bass/ keyboard amplifiers without needing any extra patch cables