AKG PZM10 Flush-Mount Boundary Layer Microphone with XLR Connector
Model: PZM10
About: AKG PZM10 Flush-Mount Boundary Layer Microphone with XLR Connector
The PZM-10 is part of the Pressure Zone Microphone line, and designed for security, surveillance, and conference-table use. Since it does not look like a microphone, it is inconspicuous. Each mic’s tubular housing mounts in a 25/32-inch diameter hole in a ceiling panel, wall or table.
The PZM-10 has a mic-level output and a 3-pin XLR-type connector for easy plug-in installation. The mic requires 12 to 48 V phantom power.
- Hemispherical polar pattern - For clear, intelligible pickup of speech
- Low profile, cylindrical design - Perfect for wall or tabletop installations
- Mic level output - Male XLR connector optimized level matching
- PZM10 powered by 12V - 48V power, XLR connector - Connects to all standard mixers with phantom power out
Frequencies below the voice range are rolled off to reduce pickup of air conditioning rumble. The high-frequency response is boosted slightly to help articulation. Because of their tailored response and PZM construction, the PZM-10 and PZM-10LL will pick up conversations or other desired sounds with extra clarity and definition.
The output is balanced, low impedance, which allows long cable runs without hum pickup or high-frequency loss. The mic’s humbucking transformer and steel case prevent hum pickup, even near fluorescent lights.
Specifications
- Polar pattern - Hemispherical
- Frequency response - 80 to 20,000 Hz
- Equivalent noise level - 26 dB-A
- Sensitivity - 2.5 mV/Pa
- Signal to Noise - 68 dB-A
- Recommended Load Impedance - 2000 Ohms
- Impedance - 240 Ohms
- Maximum SPL - 120 dB
- Voltage - 12 to 48 V
- Connector - 3-Pin Balanced XLR, male
- Finish - Off-white (Paintable)
- Dimensions (HxD) - 2.83 x 1.54 in (72 x 39 mm)
- Net weight - 0.16 lb (74 g)
UPC: 885038024859
Reviews: AKG PZM10 Flush-Mount Boundary Layer Microphone with XLR Connector
Warranty: AKG PZM10 Flush-Mount Boundary Layer Microphone with XLR Connector
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
Consumer Headphones: 1 Year
Pro Products (Mics & Headphones: 2 Years
3 year warranty against defects in materials and workmanship applies to the following select products: C451B, C451B/ST, C480B-ULS cb/61, C480B and all ULS capsules, C391B, SE300B and all Blue Line capsules (except CK97-X), C2000B,
C2000B/US, C1000S, C12VR, SolidTube, C426B, C414B-ULS, C414B-TLII, C414B-XLS, C414B-XLII, C3000B, C4000B, C4500B-BC
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
For Quebec Residents - Disclosure under the Consumer Protection Act
In compliance with Bill 29, AVShop.ca and AKG do not guarantee the availability of replacement parts, repair services, or maintenance information for any products. Any applicable manufacturer warranties will remain in place.
