AtlasIED 2-Channel Balance Line Input to Dante Interface
Model: TSD-DAC2I
About: AtlasIED 2-Channel Balance Line Input to Dante Interface
The AtlasIED TSD-DAC2i is a PoE 2 CH analog pre-amplifier that converts analog audio signals into Dante digital audio. The AtlasIED TSD-DAC2i can be used for any Analog to Dante digital audio end point but is ideally suited to be used with the AtlasIED WTSD wall mixer series. Once converted into Dante digital audio, the audio can be transmitted over IP networks and routed in the Dante Controller software. The AtlasIED TSD-DAC2i Dante Transmitter I/O Module features two analog balanced line inputs with a variable gain to operate from Line to Mic level. An Input Clip indicator prevents unwanted input clipping. There are indicators for Power and a Network connection. The AtlasIED TSD-DAC2i requires no external power supply. It is powered via a Network PoE port or a PoE cable power injector.
Features
- Dante Digital Audio Platform
- 2 CH Balanced Analog Line Input
- Wide Range Gain Adjust -20dB to +20dB
- AUX, Line & Mic Levels
- Input Clip Indicator
- PoE Powered
- Mounting Plate
- Incorporates with WTSD Wall Mixers
Specifications
- Network Interface - Single RJ-45
- Input Impedance - 15kΩ (Analog)
- Frequency Response - 20Hz - 20kHz (+/- 2dB)
- THD - .06% @ 1kHz
- Signal To Noise Ratio - 95dB @ 1kHz (A Weighted)
- Dynamic Range - 100dB (-60dBFS A Weighted)
- Power Source - PoE (52V 36mA)
- Power Consumption - 1.9W
- Height - 1" (25mm)
- Width - 3.6" (93mm)
- Depth - 3.17" (81mm)
- Weight - .44 lbs (0.20kg)
Reviews: AtlasIED 2-Channel Balance Line Input to Dante Interface
Warranty: AtlasIED 2-Channel Balance Line Input to Dante Interface
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
Passive Loudspeaker Products
| 5-Years | |
| Line Array and Line Column Loudspeakers | 5-Years |
| Loudspeaker Hardware | 5-Years |
| Passive Attenuators & Volume Controls | 5-Years |
| Classroom Security & Sound Reinforcement Systems | 1-Year |
| Classroom Security & Sound Reinforcement Accessory Microphones | 90-Days |
| Amplifiers, Mixer/Amplifiers & TSD Series Amplifiers | 3-Years |
| BlueBridge® Digital Signal Processors | 3-Years |
| BlueBridge® DSP Wall Controllers | 1-Year |
| Sound Masking Electronics | 3-Years |
| MTX Home and Pro Loudspeakers | 1-Year |
| Electronic Accessories, PSUs & Telephony Products | 90-Days |
| Metal Rack & Cabinet Products | 5-Years |
| Active Rack Accessories | 1-Year |
| AC Power Conditioners, Sequencers, & Distribution Units | 1-Year |
| Interconnects & Accessories | 5-Years |
| Microphone Stands (Except Musician Series) | 2-Years |
| Musician Series Microphone Stands | 1-Year |
| Microphone Stand Accessories | 90-Days |
| Replacement Parts | 1-Year |
| VoIP Loudspeakers | 1-Year |
| VoIP Devices | 1-Year |
| Fuses, Lamps, Batteries | No Warranty |
| 5400 Series Controllers, Communication Stations, & Amplifiers (GLOBALCOM®) | 3-Years |
| 1500 Series PoE Compact Power Amplifiers | 3-Years |
| ACS Series Controllers, Communication Stations, & Accessories (GLOBALCOM®) | 3-Years |
| Titan DSP Mainframes & Accessories | 3-Years |
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
